Jump to content
Sonic Electronix

Average wattage to your mids and highs?


Recommended Posts

Posted

Just curious what wattage everyone is running to their mids and highs. And by mids and highs I mean 6.5" and under.

I was running an RF 1000.4AD to a pair of 4" and 5.25" Boston Pro components and found 250 watts to each a tad much. Then I went back and saw some people running about a dozen speakers off the sam eamp and thought, OK... that was over kill. So just curious, what's your front stage look like and whats it getting power wise.

I swapped out the Rf and put in an Old School SS Rubicon 404 ([email protected]) and it sounds great.

Rolex you sicken me.

this_zpszasq3bwt.gif

Just let me finish my pie

~ Juice

Posted

I'm running 150+ to each of mine. Not sure exactly how much, my amp is rated at 12.5v and I'm running 16v lol. It's a bit on the high side for them though. I have to be careful how loud I turn it up on some songs.

Posted

When I had my system it was 100 watts at 4 ohm and was more than enough for my components. Probably getting a little less power than that but I was still more than happy

13 Kia Forte Build!

07 Hyundai Accent Build

***Super Seller***

N8ball2013

And then he gets to say ok all you guys were right. im sorry for being a dummy poo poo head.

ndjs.jpg

Posted

im running a kicker zr1000 which from what i heard i pretty underated i got 4 "master audio" 8s, a pair of pyle pro 8s and 2 Pyle PDBT58 bullet tweeters and im trying to get 6 more 8s to run them off the amp. Is it loud? i couldnt hear out my right ear for 2 days after i got my doors put in but it works

500x2 @ 2 ohms

Current Setup: , 2 Fi sp4 18s in a big ass flat wall tuned to 23hz, Pioneer 80prs, 2 Digital Designs m3bs strapped @ 2 ohms, Banda ICE2000, Crescendo 800.4, 4 PRV 10MR1000s,4 Mclaren MLT300 Super Tweeters Kinetik 2000 XS Power 2700 & XS Power 3100s.

Posted

I've got a punch pro 6.5 mid and tweet in each door off a t400.4. Tweets are wired at 8 ohms the mids are at 4 ohms. gives an over head for future upgrades. Can add 2 more mids and tweets and just about still be giving them all the same power a they get now. So I could basically double my cone area on my front sound stage with out needing a different amp.

t1500bdcp

2 t2d4 15"

1 t600.4

1 t400.2

1 set p1 tweets

singer alt, tons of wiring, smd vm-1, 80prs, back seat delete, still in the works, aiming for a 145-147 with the ability to play 25hz up to 50hz.

Posted

Im running 4000 watts on my mids and highs...

4 DC 175.4s :nuts:

Posted

I'm gonna run 60 x 8 and have no doubts about it keeping up with the substage.

90 Nissan 240sx

Avic z-140bh

Audison SR4

Audison Voce 6.5s

CDT es-20 tweeters

Sundown 1500v3

(2) DD 9510's

3 cube box 2 6" aeros

XS Power D2400 & Xp950

Skyhigh/Knukonceptz/Rockford Fosgate wiring

More Coming Soon.. Check my builds below.

97 Civic Hatch Build

86 Caprice Build

you can pick up a chick in a car... I think it'd be hard to roll up mackin on a broad sittin on a sundown. My opinion

Posted

Running 4 6.5s on about 600 total, so ~150 a piece, and then 4 Tweets on the 3rd channel with about 175 total so ~45 a piece with the 4th channel unused. Still need to do more tuning and figure out final tweeter placement but I'm liking how loud they all get so far.

ninja.gif Build in progress ninja.gif
Posted

75 per mid 300 per tweet

Used to have a loud truck

2009 Corvette Z06, H/C/I, 150 shot, g force tune, 730rwhp/690rwtq

2013 F-150 limited, MPT Tune, leveled on 35"s

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Who's Online   0 Members, 0 Anonymous, 3762 Guests (See full list)

    • There are no registered users currently online
×
×
  • Create New...