Jump to content
Sky High Car Audio

Why not MDF?


Neckbeard

Recommended Posts

Posted

Thats some straight up cheap birch, 7 ply... I wouldnt even call it birch since all those inner cores of that wood is Plywood, most likely Fir, with a very very thing veneer on the both sides that is actually birch, but it adds nothing to the wood strength wise..

Probably a 25$ sheet of wood, but due to that 1mm thick veneer of birch if that its 35$ lol

 

 

Posted

they dont sell 11 or 13 layer birch here anymore. its only maple. you cannot find birch like we used to use. and wholesale on maple is $45 a sheet here now as opposed to the 35 that birch used to be when they had the 13 layer, so its not like we are being cheap asses about it like you have implied. you can check out thors newest build. same wood; he and i actually had a conversation about it yesterday.

so we use the maple. which from what i can read and what they told me is the closest i can get locally to what i used to buy.

JonSig1_zpsaea3e8d2.gif

 

Contact us for the best quality cables and accessories with the fastest shipping in the industry

EMAIL: [email protected]<script data-cfhash='f9e31' type="text/javascript"> /* */</script>

LIKE US ON FB: https://www.facebook.com/SkyHighCarAudio

ADD ME ON FB: https://www.facebook.com/jon.rabe.1

MONSTER SKY HIGH/DC GMC: http://www.stevemeadedesigns.com/board/topic/127057-sky-high-monster-gmc-walk-through-12-lvl-5-15s-6-9ks-trim-panels-and-wiring-p-90/

 

Posted

I use birch, I think it's lighter than mdf too

On 11/20/2012 at 8:54 PM, AMI CUSTOMS said:

Turned mine up today at a light, guy next to me his steering wheel started moving and he looked over at me like I was a magician lol.

On 5/9/2012 at 8:45 PM, skittlesRgood said:

fuck the plating. look at what the main metal used is. you could buy unicorn blood plated terminals but if its just covering up dog shit, whats the point

On 4/10/2013 at 12:26 PM, mrd6 said:

I'll admit, half way through sanding that fiberglass in the rain and cold while I was all itchy I was definitely starting to question why i was doing this haha

  • Soon To Be
  • '04 Ford Escape
  • US Alternator 280A Hairpin
  • D4800 Under the Hood
  • (6) XP3000's in Rear
  • 1/0 SHCA & XS Power 4 runs to back
  • TORK2 kit from Tony @ CE Auto Supply
  • Pioneer DEH-80PRS
  • DD AW6.5 (2) per door
  • *Tweeter Unkown*
  • DD SS4a & C3d
  • (2) SCV4000 @ .5Ohm
  • (2) 15" Sundown Zv5
Posted

3 reasons

its lighter

it doesnt fuck up your saw blades

better on the lungs

TEAM SUNDOWN HAWAIIHAWAIICARAUDIO.NET

150Db Club

160Db club in the future

I see krakin as a threat

Posted

That is some rough Maple. Not a fan of the 5 and 7 ply when using screws. But to each their own. Hugh's hardwood down here in Sac has 11 and 13 ply baltic in stock all the time. Prices aren't bad at all.

Designing, building, and shipping boxes. Yahoo IM - kingsuv00If the listening level is too loud, please inform the driver, so he can promptly pull over, and let you out.

not many cars can get me to pluggin my ears but this one.......damn. I mean the first minute is ok but that thing just really starts digging deeper and deeper in your earhole till you cant stand it no more. Seems like it does it with relative ease....16 12's on 8 amps.........gotta love it. :)

Posted

Look for a supply house that supplies plywood and Formica to cabinet shops. You can get 1.5 thick 18 plywood from them if you order it. Watch plywood bought at the home improvement stores lot of voids in the wood. Made out of Laun for inner plys also. Building box out of 1.75 hard maple right now going to see how it sounds. If you route the edges you will not see the edges of the box. The make a special bit for the router to do boxes. Try sanding with a da from a body shop use 120 t 150 grit paper. Birch is hard to remove gross grain scratches also.

http://www.stevemeadedesigns.com/board/garage/vehicle/2438-jeep-commander/


th_140x100square.jpgMechman_140x100px.JPGDCHome.jpgI

image_url-76414-1423274612_thumb.jpgimage_url-76414-1423320284_thumb.jpg

Pioneer P99RS
Ampere 3800
2-Ampere 125/4
4-6.5 inch Hertz HSK XL Mids
4-8 inch JL Audio ZR Midwoofer

2-5.25 Satori Mids
2-Morel Tweeters, 2 Hertz Milles 3 inch on A pillars
2-Hertz Silk tweeters
DC Audio Level 5/12
Skyhigh Wire
Mechman 320
XS Power D3100

MO Funniest Thread of the Year 2013: http://www.stevemead...dy-being-a-pos/

Posted

McCoy's down here in OK has 13 ply Russian birch for $38 a sheet... 11 ply 1/2 inch is $35 a sheet. Love it. Don't even have to paint it and it looks like sex ;)

On 1/4/2013 at 9:31 PM, HatersGonnaHate said:

Wow. 184 posts and I think you're a fucking asshole.

 

Posted

At the people saying its lighter than MDF. Its actually around the same weight. well atleast my 13+ layer Baltic was heavy quality shit. at 45 bux a sheet. now 5-7 layer is lighter than mdf.

It also stains so beautifully !!!

call local lumber yards, there's like 4-5 different places here in socal all with different prices...

Posted

Weight all depends on where and what brand MDF you buy ;)

Designing, building, and shipping boxes. Yahoo IM - kingsuv00If the listening level is too loud, please inform the driver, so he can promptly pull over, and let you out.

not many cars can get me to pluggin my ears but this one.......damn. I mean the first minute is ok but that thing just really starts digging deeper and deeper in your earhole till you cant stand it no more. Seems like it does it with relative ease....16 12's on 8 amps.........gotta love it. :)

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Who's Online   0 Members (See full list)

    • There are no registered users currently online
×
×
  • Create New...