sideshow_kustom Posted June 8, 2016 Author Report Share Posted June 8, 2016 All parts have been dropped off with the Powder coat guy he told me everything should be ready Monday. Fast turn around! Well time to get back to body work! Remember the driver side fender I sanded down and it had the large hole on the bottom of it time to fix that! Well I needed to cut that out and needed some sheet metal. Good thing I keep a junk car sitting around just in case I need something! LOL Time to weld this in! Sitting waiting on some filler to cure and sitting under a shade tree I couldn't help to notice ol Pig-Pen was looking mean! Not sure if it's cause the front clip is off be he looked pissed! Back to work now! Time to Prime! Not too bad for someone that hates doing body work! Next I will block sand it tomorrow and get it ready to go to the painters to have 2 coats of Flat Black sprayed on it! Drive In Theater Speaker Build http://www.stevemead...-speaker-build/ Suitcase Build http://www.stevemead...ld-in-bis-kwik/ Coleman Cooler Build http://www.stevemead...ld-in-bis-kwik/ X10 Box Build http://www.stevemead...under-bis-kwik/ Complete Build Log On Bis-Kwik http://www.stevemead...13-wagon-build/ NEW SUB'S 8 SundownAudio X6.5sw Build http://www.stevemeadedesigns.com/board/topic/197034-new-wagon-build/ Link to comment Share on other sites More sharing options...
79 cutty Posted June 8, 2016 Report Share Posted June 8, 2016 Enter the fun....spray, block sand, spray, block sand, spray, block sand.....repeat!!!! Barf!!!! Lol Firm believer in letting my cars do my talking! You can't rush quality, it doesn't happen overnight. Quality takes time and dedication, but the end results more than pay for it. "Black Pearl" Build Thread http://www.stevemeadedesigns.com/board/topic/67183-1985-buick-regal-limited-build-log/page-1 Link to comment Share on other sites More sharing options...
sideshow_kustom Posted June 8, 2016 Author Report Share Posted June 8, 2016 Enter the fun....spray, block sand, spray, block sand, spray, block sand.....repeat!!!! Barf!!!! Lol Yeah I HATE that mess!!!!!! Drive In Theater Speaker Build http://www.stevemead...-speaker-build/ Suitcase Build http://www.stevemead...ld-in-bis-kwik/ Coleman Cooler Build http://www.stevemead...ld-in-bis-kwik/ X10 Box Build http://www.stevemead...under-bis-kwik/ Complete Build Log On Bis-Kwik http://www.stevemead...13-wagon-build/ NEW SUB'S 8 SundownAudio X6.5sw Build http://www.stevemeadedesigns.com/board/topic/197034-new-wagon-build/ Link to comment Share on other sites More sharing options...
sideshow_kustom Posted June 8, 2016 Author Report Share Posted June 8, 2016 JEEP Mode engaged! Got all the doors off now! I'm going to try to have all 4 of them ready to go to the painters by Monday! I got my work cut out for me over the next few days! With the LIFT kit 4X4 ready! Drive In Theater Speaker Build http://www.stevemead...-speaker-build/ Suitcase Build http://www.stevemead...ld-in-bis-kwik/ Coleman Cooler Build http://www.stevemead...ld-in-bis-kwik/ X10 Box Build http://www.stevemead...under-bis-kwik/ Complete Build Log On Bis-Kwik http://www.stevemead...13-wagon-build/ NEW SUB'S 8 SundownAudio X6.5sw Build http://www.stevemeadedesigns.com/board/topic/197034-new-wagon-build/ Link to comment Share on other sites More sharing options...
Broke_Audio_Addict Posted June 8, 2016 Report Share Posted June 8, 2016 The amount of work you get done in a small amount of time amazes me man, Good shit as always. When's the 6bt coming to the party? That being said a lot of people's definition of "music" is a clipped 30 hz sine wave with some 80 IQ knuckle head grunting about committing crimes and his genitals. Link to comment Share on other sites More sharing options...
sideshow_kustom Posted June 8, 2016 Author Report Share Posted June 8, 2016 The amount of work you get done in a small amount of time amazes me man, Good shit as always. When's the 6bt coming to the party? Thanks man. It will actually be closer to the first of the year before I do an engine swap. I still have to rebuild the whole front end and do a disk brake conversion on it. My plans are to get the body work done and drive it around for a bit while I still work on it some with the straight six in it. I've still got a boat load of stuff to do to get preped for that jump! Drive In Theater Speaker Build http://www.stevemead...-speaker-build/ Suitcase Build http://www.stevemead...ld-in-bis-kwik/ Coleman Cooler Build http://www.stevemead...ld-in-bis-kwik/ X10 Box Build http://www.stevemead...under-bis-kwik/ Complete Build Log On Bis-Kwik http://www.stevemead...13-wagon-build/ NEW SUB'S 8 SundownAudio X6.5sw Build http://www.stevemeadedesigns.com/board/topic/197034-new-wagon-build/ Link to comment Share on other sites More sharing options...
79 cutty Posted June 8, 2016 Report Share Posted June 8, 2016 Thank you for saying you are planning on the disk brake swap!! I can't tell you the number of X-frames I worked on over the years with tens of thousands of dollars invested in chrome undercarriage, paint, set-ups, etc still rolling factory drums. Especially with the added weight of wrapped frames and batteries in the trunk that is just straight up dumbass-ery!! Lol. A lot of them used to say they liked the drums because they looked better chromed...I just wanted to beat some sense into them! Firm believer in letting my cars do my talking! You can't rush quality, it doesn't happen overnight. Quality takes time and dedication, but the end results more than pay for it. "Black Pearl" Build Thread http://www.stevemeadedesigns.com/board/topic/67183-1985-buick-regal-limited-build-log/page-1 Link to comment Share on other sites More sharing options...
sideshow_kustom Posted June 9, 2016 Author Report Share Posted June 9, 2016 I took this shot today while I was doing some of the body work on that fender of the body hammer I felt like it was worth a share with you guy's! Drive In Theater Speaker Build http://www.stevemead...-speaker-build/ Suitcase Build http://www.stevemead...ld-in-bis-kwik/ Coleman Cooler Build http://www.stevemead...ld-in-bis-kwik/ X10 Box Build http://www.stevemead...under-bis-kwik/ Complete Build Log On Bis-Kwik http://www.stevemead...13-wagon-build/ NEW SUB'S 8 SundownAudio X6.5sw Build http://www.stevemeadedesigns.com/board/topic/197034-new-wagon-build/ Link to comment Share on other sites More sharing options...
bsneon98 Posted June 9, 2016 Report Share Posted June 9, 2016 looking great man! I love how you get your patch panels. I loled really hard at that one. Build Log: http://www.stevemeadedesigns.com/board/topic/152954-1998-plymouth-neon-updates/ Link to comment Share on other sites More sharing options...
sideshow_kustom Posted June 9, 2016 Author Report Share Posted June 9, 2016 Working on the doors today! I got Door #1 in primer and almost ready to go to the painters! Also got this piece ready to go and in primer. Not really sure what this panel is called! It goes on the front and holds the grill and is mostly covered by the bumper. Getting Door #2 sanded down and it had a few little secrets looks like! It's not too bad but I will have to weld in a few pinholes as well as it has a long shallow dent down it that I will hammer out most of the way before putting a light coat of filler over it. It won't be bad just hope the other 2 aint hiding anything! I'm still working to meet my Monday deadline with having all 4 doors ready to go to the painters to be sprayed BUT I got to work 12 Hours Saturday so that put's a HUGE dent in my plans! Drive In Theater Speaker Build http://www.stevemead...-speaker-build/ Suitcase Build http://www.stevemead...ld-in-bis-kwik/ Coleman Cooler Build http://www.stevemead...ld-in-bis-kwik/ X10 Box Build http://www.stevemead...under-bis-kwik/ Complete Build Log On Bis-Kwik http://www.stevemead...13-wagon-build/ NEW SUB'S 8 SundownAudio X6.5sw Build http://www.stevemeadedesigns.com/board/topic/197034-new-wagon-build/ Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.