06RTCharger Posted June 22, 2018 Author Report Share Posted June 22, 2018 Made a better cover for the doors rods, the butyl rope was holding like i wanted so im trying some heavyduty velcro. Stuck both sides of the velcro together. Then applied the strips in place. Then removed the other plastic backings and stuck down my luxpro cover i remade. Link to comment Share on other sites More sharing options...
06RTCharger Posted June 22, 2018 Author Report Share Posted June 22, 2018 Everything was done, just reassembling the doors. Then this happened.... SMFH i wanted to turn the push terminals so that the holes are toward the sides instead of straight back. Loosened them and put them the direction i wanted, last one i tighten down and SNAP the fkn bolt on the push terminal snaps. Reminded me of breaking the bolt on my radiator hose lmao FK some shit always has to go wrong, didnt piss and moan too long, got to thinking how i can make it work right now. Too scared to solder directly to the leads. This is what i came up with. Luckily i had bolts thin enough to fit the same hole. Also i just bought nylon locking nuts for those bolts earlier today so that worked out. Pulled my wire ferrules off with pliers and crimped on some ring terminals i had already. Link to comment Share on other sites More sharing options...
06RTCharger Posted June 22, 2018 Author Report Share Posted June 22, 2018 DONE completly sealing and deadening as much as possible. Passenger door. Driver door. sounds way better now. Just did some tuning and messing around with settings. Now the L8SE is starting to get impressive lol just need to tinker with it more and figure out how to go about creating an EQ. Link to comment Share on other sites More sharing options...
WalledSonic Posted June 22, 2018 Report Share Posted June 22, 2018 Damn dude, great job on the doors. Tip top. Chevy Sonic Wall (4) 15's on 10k Build Log https://www.stevemeadedesigns.com/board/topic/209412-2015-chevy-sonicwall4-15s10klithiumlarge-case-hairpin-us-alts/ (4) Fi SP4 15's | (2) Ampere 5Ks | Active! | Arc KS600.2 & KS125.2mini | CDT Silk Domes | Silver Flute 8s | 240Ah JY | US Alts Jeep Wrangler JK (4) 8's in a 4th Order Build Log https://www.stevemeadedesigns.com/board/topic/209841-shadow-2016-jeep-wrangler-jk4th-order4-8sdc-35klarge-case-hairpin-us-alts/ IG @walledsonic Link to comment Share on other sites More sharing options...
SkarredSierra Posted June 22, 2018 Report Share Posted June 22, 2018 You can buy those spring terminals like that on ebay pretty cheap but it looks like wat u did is solid. I like the look of it more than the spring terminals anyways. Doors look solid af bro. Nice work. Link to comment Share on other sites More sharing options...
bmwking Posted June 22, 2018 Report Share Posted June 22, 2018 god damn i bet those doors are like knocking on a tree now. im jealous! nice work bud Link to comment Share on other sites More sharing options...
06RTCharger Posted June 22, 2018 Author Report Share Posted June 22, 2018 11 hours ago, WalledSonic said: Damn dude, great job on the doors. Tip top. Thanks man, i like how it turned out in the end. 7 hours ago, bmwking said: god damn i bet those doors are like knocking on a tree now. im jealous! nice work bud Lol does sound like knocking on a houses front door. Lot more thudie lol. Link to comment Share on other sites More sharing options...
06RTCharger Posted June 22, 2018 Author Report Share Posted June 22, 2018 8 hours ago, mathewyocham said: You can buy those spring terminals like that on ebay pretty cheap but it looks like wat u did is solid. I like the look of it more than the spring terminals anyways. Doors look solid af bro. Nice work. Thanks man. Ill probably redo the terminals some how, just didnt wanna deal with it for too long. Just wanted it all back together and get to fully hear it play. Link to comment Share on other sites More sharing options...
Karkov Posted June 25, 2018 Report Share Posted June 25, 2018 Tremendous work on the doors, i'm a little jelly I didn't go that far on mine 2007 Chevy Tahoe (SOLD) 12 ~ FI Audio X series 10" w/BP option 2 ~ DC Audio 5.0K @0.67 3 ~ DC Audio 5.0K @1.0 2 ~ PPI 3 way sets (not installed yet) 1 ~ RF T400-4, 1 ~ RF T600-2, 1 ~ RF T600-4 4 ~ CT Sounds 5.25" Strato comps (rear fill only) 1 ~ XS Power D4800 1 ~ XS Power D3400 8 ~ XS Power XP3000 160 stock alt, Mechman 370 Elite, 185 DC Power 320+ Sq. Ft. Sound Deadener Pioneer AVH-X5500BHS Youtube: https://www.youtube.com/user/knfjdkghjudfhsgkjdhf/videos?sort=dd&view=0&shelf_id=0 Link to comment Share on other sites More sharing options...
06RTCharger Posted June 25, 2018 Author Report Share Posted June 25, 2018 1 hour ago, Karkov said: Tremendous work on the doors, i'm a little jelly I didn't go that far on mine Thanks man lol. It is a time comsuming task, not sure its worth the extra detail i do or not lol. But i wouldnt be happy if i didnt do it kinna overkill, Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.