just1moreamp

Try this out. port 3'' x 32'' x 21'' that shoud give you like 14.50in per CF ant tune you to 35hz

Thats alot of port area you got there....just saying.

Is your 2000 explorer a 4door are a 2door. i have a 4door explorer and dont have that room. i have 41wide---28deep---18tall if you wont room for the port.

Are you going to put a brace in the port. i see you have a brace from top to the port but no brace in the port. just asking

So you have a set of D2 wired to .5 on that amp on a stock Alt and batt.

If its flat dead hookup a hot batt with it to the charger 2amp and let charge overnight then check it.. thats how i was told to charge a dead agm batt.

Yes you would need to use all 4 crossovers.

I have some nice 6x8 and some 6.5'' comps

Dont think the sundown E12 is going to last long on that power.

The onlyone i would even think of useing is the -DB drive

He scamed someone on another form for a sundown amp awhile back he is a piece of shit

Subs up port back

Try something like 27'height 48'wide 26''depth with a 6''tall 28''wide 16''deep port. that would give you 168in of port and a tune of like 33hz-----------hope that helps

Now i need to get a cc-1 to go with the dd-1...... thanks again.

pm'd you on. let me no asap.

.5

do you wont 2sale it 2me are what, i have sent you a pm.

sent you a pm let me no asap.

Nice video Mr Meade

Looks like 8.57cf gross

If you are going to do a v8 swap drop in a 351 with a tfs-stage 2-cam and gt40 heads and intake with 30pound injecters and 75mm massair and do a 373are a 355gear if its a 5sp-t5 trans a good set of headers and x-pipe and a 225-fulepump and a ajustable-fulereg and get you some southside liftbars a 125-shot shoud have a good runing mustang- i had a 92-mustang with this setup for a streetcar.

ebay----audiopipe 1000 for 130.00

Thats right thay are on top-mybad- thats the gains for the amp and yes you need to set them all the same. i think you will need a 6ch amp 2run the setup that you have in your car.

The mc140 has 4gains one for ea ch of the amp on the bottom of the amp. and you would need a step down to go from hu-to-rca output. as for how you would wire the amp to your setup to run active you would need a crossover to do that. might hitup RAY and ask him for some input on this.

You have a real nice sq amp for low power, its 35x4 at 4ohm and 45x4 at 2ohm it was one of the best amps that thay made nice sq but dont make alot of power sounds nice with some good comps, you can send it to me and i will take good care of it for you...