Jump to content

MrSkippyJ

Members
  • Posts

    10293
  • Joined

  • Last visited

  • Days Won

    22

Everything posted by MrSkippyJ

  1. so just ground my amps directly to the rear battery? i always thought you should ground amps to the chassis or frame because that would require the shortest length of ground wire. You need the shortest wire for the (-) since the electricity will be flowing through the wire AND the chasis. If you run a wire to the battery, it's only running through the wire.
  2. i can't believe you guys can read what he is writing. I haven't figured it out yet.
  3. I'm not worried about getting my stuff stolen...famous last words man.
  4. maintaining the batteries won't really hurt they alt, but draining them and then using the alt to charge them will shorten the life of the alt.
  5. correct, however, he was correct in saying they are an extra drain on the alternator. Once they are used up, they have to be recharged. Best bet is to charge them up every night and keep an eye on your voltage while playing. If your voltage starts dropping low and stays there, cut off the music and let stuff catch back up. Also, no need to run the stereo with the alternator not running.
  6. No, they help when the car is running also. batteries help fill in when an alternator can't keep up. Of course, you have to keep these batteries charged or your alternator will die a faster death than normal.
  7. is there a mac program that has the WMP oscope feature?
  8. yes they will load test your battery, i have no idea how accurate it is though.
  9. that is what i thought I'm assuming you don't use bass boost and you haven't cranked and settings up past where they were when you set your gains right?
  10. that certainly is a good question. I would recommend the CC-1.
  11. rap music, shouldnt be playing below tunning the ssf is set for 30hz, most of my music is pretty clean and i run it threw audicity first. how do you know it is set at 30hz? and "pretty clean" doesn't cut it when over powering AND using a box that is too big well the lowest is 10 and the highest is 50 so i have it set at 12 oclock right in he middle should be 30. You need to watch some of the CC-1 videos and see just how far off those dials can be.
  12. rap music, shouldnt be playing below tunning the ssf is set for 30hz, most of my music is pretty clean and i run it threw audicity first. how do you know it is set at 30hz? and "pretty clean" doesn't cut it when over powering AND using a box that is too big
  13. and what music? plus are you playing below tuning? the DD-1 is great for getting max clean power out of your amp, but that ISN'T the only way to get coils stinky. Below tuning, clipped music, improper enclosure, too much power are some things that will get your coils stinky, no matter how clean the signal is.
  14. oh, my car has about that much, lol. carries my fat ass around pretty well though.
  15. what is your concern with weight?
  16. And how would you prove your life was in danger? Thinking like that is a sure way to get some time behind bars and deal with a hell of a civil suit. same way you would if you killed him? i guess if i am more likely to end up in jail if i let him live i would kill him.
  17. Regardless if you came to my shop or not my pockets will still stay fat. Great attitude. I'm not here to impress you, I ask a simple question, I didn't ask were you would go or wat you would do.... Regardless of wat one person says I like to have multiple opinion on products , not base my judgement on a 1 or two people. what opinion are you looking for? Seems you were asking about the power output of 2 products you "sell". That isn't an opinion or a judgement.
  18. both copper underneath plating? go for gold then.
  19. man, we have this guy that straight piped his bike and goes all out down the street every morning. so fucking annoying to wake my whole damn house up. It's not even a good sounding bike, it's just loud.
  20. hooked it up off a batt. charger. straight into protect mode. for the record, don't do that again take the amp in to someone so they can check it out. if rewiring it didn't help then it's probably something else. double check and make sure that there are no strands of wiring that are crossing terminals, especially on the speaker output side.
×
×
  • Create New...