memphisBred

Doesn't look like my other two 15s will be here by then. I'm shooting for the 28th in Lebanon or 5th in I think Fayetteville. Also Blake I'll paypal you 20 dollars if you'll do the Sound Pressure class.

Mines built with only one sub in as im waiting on 2 others i ordered and my other recone comes tomorrow. Usually take a pic or two when complete. Ill try and post a pic tomorrow. I was barely able to build outside of my vehicle. Any higher or wider and it would have had to been built inside. 16 cubes and center port

The biggest XS Power front battery and two D3100S. 4 runs(2 power/2 ground) I use XS Power as an example because i dont know the model numbers of other companies.

I had enough room for 4 15's at 16 cubes net with 41 wide, 32.75 high, and 35 deep. Seems like you should have enough room.

Whats your depth?

The middle power needs to be where the ground is and the ground needs to be where the power is. Don't be so picky CJ

I like vinyl over carpet. If you are willing to get everything smooth, so paint will look good, that's a great option.

The quote I got on my Pioneer 4100 was higher than the price of my AVH-P3200 I bought. That was just for the glass not the LCD. The rep I spoke with sad it may end up in the 4-600 range. Hope you get some info and get it fixed.

I ordered mine and shipped mine in on the 28th of February. They got them on the 7th of March and had them built on the 21st but were waiting on the 15" cones to come in. Now they will be here by the 5th of April. So looks like if they have everything they can do them in 4 weeks with two of the weeks being one week of shipping them there and one week of them shipping to you. Not sure if that's with them being busy or not, so id say somewhere between 4-6 weeks on average.

I have a 125.2. I'll do 125 + shipping/paypal fees.

Rose is faster, more athletic, finishes at the rim better, and is a better shooter. Rondo is seen as the better passer due to his assist numbers but he's passing to three hall of famers and working in an actual structured offense, where his job is to pass, pass, and pass. If Rose ever gets a HOF'er/all-star(Boozer's soft) next to him he'll put up the same scoring numbers and could match Rondo's assist numbers.

Several people on here have the N3's and have good luck with them on music.

More power! Looks good.

What's the highest voltage the 12v batteries should see while the cars running/alternator is charging?

You brought up what the problem was DJ. Without your help I'd be on hour 12 checking fuses. It was a easy fix too, which I should have known. Thank you.

Everythings good. I used a bolt/nut/washer to connect the short wire to a 6" piece of 8 awg and was able to get it to reach. Thanks to Matt @ mechman for that tip and all the members here for the help.

What exactly is the fusible link? Where should I be looking? Also there's three 12v posts on the starter does it matter which one I use?

Anyone know where the stock alt wire goes to on a 2001 Explorer Sport?

The issue is the stock wire.

Ran a new wire from starter to alt post and it's creating big sparks every time I touch the wire to the post. Seems like straight to the battery wouldn't fix m problem as I have two 1/0 runs from alt to battery.

Where does the wire go from the alt charging post?

I'd say it's a little smaller than 4 awg

Do I need to disconnect the wire before cutting the insulation?

What's the best way to lengthen/make the cable reach? I was hoping to see the cable ran a long way zip tied at certain spots but it looks like it's as far as it will go.

Wow I've been staring at it disconnected thinking that was it. The charging post on my Iraggi was in the same position as the stock and the cable reached easily. Now the charging post is on the back of the alt and the cable won't reach.