Skullz Posted December 8, 2013 Report Share Posted December 8, 2013 Pair of RF P1 10's Pair of SI BM 10's reconed from jacob Pair of PPI pro 104 10's They were all clipped to death from a bad H/U sending clipped signal randomly so you never knew it was clipped till it was too late, sadly though i had to go through all of those and still wasn't able to find the cause till the h/u went bad and got a replacement, and have yet to blow another sub. Alpine CDE 102 was the bane of my fucking existence for over a year. PPI PC2600 went up in smoke due to age and pushing it to the limit. PPI AM2150 Suffered the same fate as the pc2600, amps as old as they were just weren't able to take the abuse day after day like something new could. 01 Ford focus ZX3 Pioneer AVH-X491BHS PPI PC 4800.2 Morel Maximo 6.5" x2 Link to comment Share on other sites More sharing options...
afro Posted December 8, 2013 Report Share Posted December 8, 2013 I damage things long before I blow them: 1 power Acoustik FUBR - Drill went through surround 2 Addictive Audio Version 2 - Drill went through surround on both 1 Alpine MRV1000 - Was mounted inverted with circuit exposed/ glowing, took the plexi cover off to service the amp next to it, placed a box of screws on the box right above the amp, turned truck on, played some music, screws dropped, shorted the amp. Blown 1 Coustic sub back in like 2002, gains all the way up. Finally learned some lessons since then. Link to comment Share on other sites More sharing options...
smashedz28 Posted December 8, 2013 Report Share Posted December 8, 2013 Blew a bad ass ppi power class 4800 the chrome one. Back when ppi was worth a shit. Sloppy wiring. Link to comment Share on other sites More sharing options...
SICKSPD Posted December 8, 2013 Report Share Posted December 8, 2013 fried a dc 10.0k after i hooked up to a funky pup 09 Challenger R/T (Audio system under construction): Pioneer AVH-X4500BT (PAC RP4CH11 harness) (2) Sundown Audio SA-8v2 (inverted) CT Sounds AT1400.1D XS Power D3400 40 sq ft. Audiotechnix deadener 1/0 Audiotechnix wiring stock Boston Acoustic 7 speaker amplified system (for now) Sealed trunk enclosure Build log: http://www.stevemeadedesigns.com/board/topic/178399-slammed-dodge-challenger-sundownct-sounds-build/ TEAM GOAT Link to comment Share on other sites More sharing options...
goldeneye4564 Posted December 8, 2013 Report Share Posted December 8, 2013 audioque 2200 also known as the curse. amp works when it decides to and never has any high output anymore. just protects. this is all after it blew up three times. my fault, low voltage and shitty alt in my other car. hifonics hfi 2000d, got real hot and cooked mosfets. replaced mosfets and it works. never blown a sub. (guess i am just lucky) I RREEALLY ANGRY WIT U PHOTOBUCKET. HAD TO USE DROPBOX NOW HOLYYYYYY. Wanna ride bikes? Quote On 9/16/2017 at 3:28 AM, Jake Pace said: Oh i know how a 12v system works I did take 3 years of electronics in High school hands on and some in college and also worked on cars in college an always got A's to B's in each class. But oh well enough dealing with ppl who have probably not even lived as long as ive been into electronics! On 7/8/2013 at 4:01 AM, Banshee421 said: Do horns get low Link to comment Share on other sites More sharing options...
Tebo Posted December 8, 2013 Report Share Posted December 8, 2013 Forgot I blew an aq2200. Installed a high out out alt and didn't realize I blew the alt fuse. Some how the alt still charged with no regulation and the voltage spiked to like 16.9 and I saw smoke =[ 04 dodge dakota ext cab 4x4 excessive amperage 300 amp alt with MONSTER stud =)sundown z v3 15 in a 4th order on aq2200sundown 100.4 2 way active...2 Prv audio 6mb200 & 2 re XXX tweetersdeka intimidatorkenwood x396big 3 1/0 knu wire back to deka intimidator Link to comment Share on other sites More sharing options...
Aj11 Posted December 11, 2013 Report Share Posted December 11, 2013 blew 2 cerwin Vegas on one jl 500/1. correct gain no boost just crappy subs took 3months before they were crackling and popping. i also blew some kids xplods because he thought my 500w jl wasnt as powerful as his xplod 1200w amp. put his box in my car didn't touch a setting put the song centipede on and well his sub didn't last threw the whole song. f#$k xplods oh i forgot a dual hu caught on fire in my firebird.the deck that came in the car when i bought it was Just done. i went to Walmart with what was left over from buying the car. (96 firebird pull Me over red ttops 3.8l auto 67k miles) bought a $35 dual deck against my good judgement. had the deck for 2 months no aftermarket system. pulled into Walmart parking lot(irony) and my speakers started popping and hissing then i seen smoke come from the deck then actual flames! i just ripped it out and threw it out the window! scared the shit out of me. i found out later that my brother inlaw had the same deck catch on fire in his ranger a year before jvc deck stinger 1800 front hc 2000 kinetic rear 2 runs of 1/0g big 3/4 ct 60.4 2 ct 1400.1 ct EXO 15 d1 lots of deadner type r comps front stage 6 kicker tweets rear stage lots of great stuff coming soon ho alt more bats ct comps for front stage more deadner sweet amp rack lots of L.E.D lights new deck (thinking 80 prs, or flip out) Link to comment Share on other sites More sharing options...
pioneerforlife Posted December 11, 2013 Report Share Posted December 11, 2013 Never blew a sub that has been in an actual install. I never have blown an amp either. I am pretty careful with my equipment 2007 Ford Focus SES Hatchback Pioneer HU 4 Digital Designs 9515i's in a B pillar. 2 Soundstream XXX 15K's (running at 16 volts) Soundstream Mids/Highs in custom door panels (getting rebuilt soon) Soundstream TA2.160 and TA2.400 Sky High and KNU wiring 3 Banks of Maxwell caps Winston Lithium (not a fan) Bump4Life 250 Amp Alt. aka USAlternators Soundstream Focus and Avenger Build Log Instagram @p4linnovation YouTube: Team Blowin Loud Link to comment Share on other sites More sharing options...
ToNasty Posted December 11, 2013 Report Share Posted December 11, 2013 Never blew a sub that has been in an actual install. I never have blown an amp either. I am pretty careful with my equipment Your not pushing hard enough ***Super Sellers List***http://www.stevemeadedesigns.com/board/topic/25829-super-sellers-buyers Link to comment Share on other sites More sharing options...
focused313 Posted December 14, 2013 Report Share Posted December 14, 2013 Type R's, Cerwin Vega, JL W3's, Rockford Punch, etc.... Blew them all by being ignorant about clipping. Too much boosting eq crap lines. I didn't blow every sub, but in every setup, I messed up at least one sub from melting voice coils to...some other stupid crap. R.I.P. Learning Everyday. Pioneer AVH-P4000DVD Alpine SPS-610C BXI-2008D (2) SWR-1242D / Ported Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.