bassaddiction Posted January 19, 2014 Author Report Share Posted January 19, 2014 you have 400 watts rms going through a lot of 14gauge wire. might be loosing some power. most likely not much though. don't know if it would help but bigger wire could be an option. i might separate everything like 2 speakers a channel bring them down to 2 ohms Link to comment Share on other sites More sharing options...
alaskanzx5 Posted January 19, 2014 Report Share Posted January 19, 2014 give it a try, cant hurt to try and squeeze more out of the current setup before starting over. t1500bdcp 2 t2d4 15" 1 t600.4 1 t400.2 1 set p1 tweets singer alt, tons of wiring, smd vm-1, 80prs, back seat delete, still in the works, aiming for a 145-147 with the ability to play 25hz up to 50hz. Link to comment Share on other sites More sharing options...
gr8handogoatness Posted January 25, 2014 Report Share Posted January 25, 2014 hmmm i use 2 hifonics 8'' square 8 ohm 1 channel 150w rms 300 max tritons . and im using a sony xplod 600w 4 channel soo 150 each channel and well ... the gain is all the way down but yet their still too loud .... lp . ap . hp probably mean low power witch u use for bass all power for full range ..... and hp probably is high power witch u use for highs only .... try setting it to all power '' aka full power'''' i doubt those are ment for bass only HA, that just happened. Anyway looking at the pictures, it looks like you are missing the switch, which you confirmed. Also most people think amps are only for subs so I'm betting that you got this amp from one of those people and the switch is on Low pass. So get a "new" amp and test it out. Also cover those holes to isolate the rear wave, that will improve things as well. But my money is on the amp. Try a new amp, or take the cover off the RF and see if you can find the missing switch. Link to comment Share on other sites More sharing options...
poorfish88 Posted January 25, 2014 Report Share Posted January 25, 2014 hmmm i use 2 hifonics 8'' square 8 ohm 1 channel 150w rms 300 max tritons . and im using a sony xplod 600w 4 channel soo 150 each channel and well ... the gain is all the way down but yet their still too loud .... lp . ap . hp probably mean low power witch u use for bass all power for full range ..... and hp probably is high power witch u use for highs only .... try setting it to all power '' aka full power'''' i doubt those are ment for bass only Not sure if this guy knows how to google, but it's too late at night to laugh. I came to this thread hoping to learn something and oh I learned something alright. Link to comment Share on other sites More sharing options...
P4killer_ Posted January 25, 2014 Report Share Posted January 25, 2014 Make sure the speakers / channels are wired in phase correctly. Setup: 2010 Hyundai Elantra Factory Unit via 4 chan NVX LOC Excessive Amperage "H/O" Alt Xs D3400/ Xs XP3000 Big 3. 2 Runs of +, 2 Runs of - DD M3b and 2 12" AQ HDC4s Link to comment Share on other sites More sharing options...
bassaddiction Posted February 21, 2014 Author Report Share Posted February 21, 2014 i rewired it two speakers per channel 2 ohms each final load still the same volume but is much more Efficient idk what to do now i guess sound stream isn't as good as i thought (sucks ass) Link to comment Share on other sites More sharing options...
Joshua Dumas Posted February 22, 2014 Report Share Posted February 22, 2014 Do they move much? Can you try taking a video? Link to comment Share on other sites More sharing options...
ChevyBoy95 Posted February 22, 2014 Report Share Posted February 22, 2014 have a buddy who runs basically all soundstream mids, loud as balls [like unnecessarily], clear as crystal. Best Score to Date : 160.5 dB Outlaw (47Hz)[4 XM 15's & 2 Taramps Bass 12k's] BL : http://www.stevemeadedesigns.com/board/topic/147800-chevyboy95s-4-15s-7krms-wall-1533-db-on-half-power/YouTube: http://www.youtube.com/hitemwiththeflex/ Link to comment Share on other sites More sharing options...
pioneerforlife Posted February 22, 2014 Report Share Posted February 22, 2014 I don't think its the speakers. Try giving them more power. My friend runs a pair of the pro 6x9's in his front doors and they are very loud. Idk I mean with as many speakers as you have you may need more power. How much do you have now? 2007 Ford Focus SES Hatchback Pioneer HU 4 Digital Designs 9515i's in a B pillar. 2 Soundstream XXX 15K's (running at 16 volts) Soundstream Mids/Highs in custom door panels (getting rebuilt soon) Soundstream TA2.160 and TA2.400 Sky High and KNU wiring 3 Banks of Maxwell caps Winston Lithium (not a fan) Bump4Life 250 Amp Alt. aka USAlternators Soundstream Focus and Avenger Build Log Instagram @p4linnovation YouTube: Team Blowin Loud Link to comment Share on other sites More sharing options...
XmaximuS Posted February 22, 2014 Report Share Posted February 22, 2014 Make sure the speakers / channels are wired in phase correctly. ---------------------------------------------------------------------------------- I was thinking the same thing. What's the crossver sloped at(6db, 12db or 18db)? Probably wouldn't matter if its set on HP... X MY BUILD LOG>>>> NAH I BETTER NOT.. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.