Antoni Čović Posted January 29, 2018 Report Share Posted January 29, 2018 Hello everyone, I didn't see any similar topics on forum so I thought I will open one.. So the point of this topic is to post your watt clamped results from your system. You can post pictures or just write.. It would be cool if you wrote your equipment: amplifier, subwoofer, box size and tuning, electrical and then post your clamped results. You can post a picture or video of your system too! If you don't know how to measure your watts look at this tutorial: http://ddaudio.com/faq/clamp-testing/ So let me begin.Amplifier: Hifoinics BXI6000DSubwoofer: Fi audio Q 15 wired to 1 ohmBox: 4cuft 32hz tuningElectrical: 2x 54ah battery & 75a alternatorClamp result: 1064 Watts (50 Hz) Link to comment Share on other sites More sharing options...
WalledSonic Posted January 29, 2018 Report Share Posted January 29, 2018 1064W at which frequency? Chevy Sonic Wall (4) 15's on 10k Build Log https://www.stevemeadedesigns.com/board/topic/209412-2015-chevy-sonicwall4-15s10klithiumlarge-case-hairpin-us-alts/ (4) Fi SP4 15's | (2) Ampere 5Ks | Active! | Arc KS600.2 & KS125.2mini | CDT Silk Domes | Silver Flute 8s | 240Ah JY | US Alts Jeep Wrangler JK (4) 8's in a 4th Order Build Log https://www.stevemeadedesigns.com/board/topic/209841-shadow-2016-jeep-wrangler-jk4th-order4-8sdc-35klarge-case-hairpin-us-alts/ IG @walledsonic Link to comment Share on other sites More sharing options...
Antoni Čović Posted January 29, 2018 Author Report Share Posted January 29, 2018 2 minutes ago, WalledSonic said: 1064W at which frequency? At 50hz. I just updated it. Link to comment Share on other sites More sharing options...
AlpineNut Posted January 29, 2018 Report Share Posted January 29, 2018 This is basically the same as the amp I have now just a JBL. 73456w9vbwevsdb sodtbsorutnvsd sdtuspdun sd d f gsdfiusd gdf n Link to comment Share on other sites More sharing options...
WalledSonic Posted January 29, 2018 Report Share Posted January 29, 2018 20 minutes ago, Jake Pace said: This is basically the same as the amp I have now just a JBL. Clamped results in your own vehicle will change the output based on the speaker you attach, the box its in, the cabin gain, etc etc. Amp dynos are great, but real in car results with your own setup is what I think OP is looking for. Chevy Sonic Wall (4) 15's on 10k Build Log https://www.stevemeadedesigns.com/board/topic/209412-2015-chevy-sonicwall4-15s10klithiumlarge-case-hairpin-us-alts/ (4) Fi SP4 15's | (2) Ampere 5Ks | Active! | Arc KS600.2 & KS125.2mini | CDT Silk Domes | Silver Flute 8s | 240Ah JY | US Alts Jeep Wrangler JK (4) 8's in a 4th Order Build Log https://www.stevemeadedesigns.com/board/topic/209841-shadow-2016-jeep-wrangler-jk4th-order4-8sdc-35klarge-case-hairpin-us-alts/ IG @walledsonic Link to comment Share on other sites More sharing options...
Antoni Čović Posted January 29, 2018 Author Report Share Posted January 29, 2018 52 minutes ago, WalledSonic said: Clamped results in your own vehicle will change the output based on the speaker you attach, the box its in, the cabin gain, etc etc. Amp dynos are great, but real in car results with your own setup is what I think OP is looking for. That's right! Link to comment Share on other sites More sharing options...
Markous Posted January 29, 2018 Report Share Posted January 29, 2018 Gear is listed in my signature below. Just did this for the first time yesterday. 1st run i did a 0-60 sweep off YT and got a 136.1 @ 27 clamped 1178W then i played a 27 hz track from bass mekanik for this one. I was watching my clip light not the screen and apparently i hit that number with 7-800w, didn't gain any after that. '07 Ford Ranger - DM-608 I E700.4 I SA-CX6.5 v2 I SAZ-1500D 15th (x2) I Zv6 12" D1 I SB500-34 I JP40 I On 5/21/2015 at 7:07 PM, boom50cal said: of course he gives no fucks. it's a ford ranger. only bad mother fuckers drive ford rangers Link to comment Share on other sites More sharing options...
alex912005 Posted January 31, 2018 Report Share Posted January 31, 2018 Amplifier: Digital Designs M4Subwoofer: Fi SP4 v1 18 wired to .7 ohmBox: around 6.25 cuft net (not sure, didn't build it myself) 32hz tuningElectrical: 2 x Northstar AGM31M & Singer 270 A alternator (clamped 140 A at idle, not including stock wire) (build log)Clamp result: 37.2 AC amps x 75.8 AC volts = 2819.76 watts (don't know frequency, was done on a song not test tone) Final impedance: 75.8 ÷ 37.2 = 2.037 ohms (rising from .7) My Build Log Link to comment Share on other sites More sharing options...
RedFred Posted February 1, 2018 Report Share Posted February 1, 2018 2 SoundQubed 2200s @ 1 ohm each. 370a alt, one G31 battery. 2 NVX VCW152s in a 5.8 cube box w/ 8" aero (subs pictured are C315s, didn't get pictures with the NVXs) 38hz @ 4.3 ohms -> 2217w (1,108.5w each) @ 12v idle 34hz @ 5.2 ohms -> 1539w (769.5w each) @ 13.5v idle (Pretty sure this was the first clamp test I ever did, and I wasn't going full tilt @34hz, but was @38hz, might explain the difference in power, resistance, and voltage) ---------------------------------------------------------------------------------------------------- 1 AudioQue 2200 @ 0.5 ohms, 270a alt, one G31 battery. 1 SoundQubed HDC418 w/ PSI recone, 5.8 cube box w/ 115 square inches of port. 41hz @ 1.9 ohms -> 1640w @ 12v idle 30hz @ 1.1 ohms -> 2147w @ 12v idle ------------------------------------------------------------------------------------------------ 1 SoundQubed 2200 @ 0.5 ohm. 370a alt, no extra battery. 2 SoundQubed HDS210s in a 2.2 cube box, 6" aero port 45hz @ 2.1 ohms -> 1320w @ 12v idle 38hz @ 1.5 ohms -> 1860w @ 12v idle Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.