audiofanaticz

Man that is looking clean and crazy beautiful!

If its the DC branded basket your not going to find it online for sale anywhere unless its used (which people normally dont sell used). The only place you'll be able to get it is from DC direct, and they most likely wont sell just the basket alone unless you order the recone with it, and even then they would most likely want you to send it in to them. Many companies with exclusive baskets will not offer them to people to buy because they will want to take those parts and build a woofer with a bunch of different manufactures parts. Sundown is the same way with their branded baskets.

yeee

That black really pops out at you! Looks great!

Well I guess I better come pick up that DGAF Toyota sooner than later so you have room!

You must reply in the same thread as Steve (Meade916) posted, not make a new one.. Any vote not in Steves thread WILL NOT COUNT!!!

Wrong thread Tekmaster........

You need to reply to the thread that steve created. making a new one does not enter you!

WRONG THREAD YOUR POST DONT COUNT.

mhmmm pubg

Ok I guess I got to lock this because people still cant read even after I said this is the wrong thread...

You guys are not even posting in the right thread to enter the contest... ?

yee

If its working on the deck then its not broke, it has no way to distinguish what it is hooked up too (ie a deck, rca, or amp). Most likely may have subwoofer volume or SLA turned up too high, both will cause distortion if set too high. IIRC neither the SLA or Subwoofer volume be distortion free when either are turned all the way up (even though the headunit volume is distortion free, those other 2 need to be manually adjusted). So your best to find the max headunit volume with those other 2 settings at 0, then turn SLA up until you see distortion (usually around volume 2-4). Then do the same for subwoofer volume that goes from -10db to 0db or something like that. Re-Read the manual on page 12 as well. 10. Play track 1 on test CD 11. Set the headunit’s bass, treble, EQ’s, crossovers to flat 12. Set the headunit’s volume to the maximum undistorted volume setting that was measured with the DD-1+ previously. 13. The unit should display 40Hz Detect, along with the voltage reading of the signal. 14. Slowly turn up the amplifier’s gain setting until the Distortion LED illuminates continuously. Leave Gain Setting such that Distortion LED remains on, then PRESS "READ" button. 15. Change track to 3 on test CD, DD-1+ will show current gain overlap setting. 16. Adjust the gain control on the amplifier until the desired gain overlap setting is achived.

You could also email D'Amore Engineering, but they are SWAMPED so it may take longer to hear back.

Whats broke? They will usually warranty problems if they arise since its so seldom. email Antheny at [email protected]

Ports on the wrong side may hurt you a little. If you ever get a chance to meter again try the sensor on the driver side dash (instead of passenger side dash).

Can I get AMM-1 added to mine as well. Thanks!

Holy duck he is getting HUGE!