Leaderboard

are you guys almost ready? LETS GOOOOO!

this shit is a lot of fun - i am glad you guys like these vids

Today is Sunday. Amp test Tuesday does not happen today. Please check back any day of the week that starts with Tuesday.

•It is very important that proper charging techniques be used when charging XS Power batteries. XS Power batteries are designed for use with the XS Power battery chargers with a MAXIMUM output voltage of 2.4 volts per cell (14.4v for 12v batteries and 19.2v for 16v batteries). AT NO TIME during charging should the battery be subjected to more than 2.4 volts per cell. Voltages above this will cause the battery to “gas” and once the oxygen is vented it cannot be restored. •Under-charging XS Power batteries is equally damaging to the life of the battery. Take special care to ensure that the battery is properly charged before the initial use by verifying the open circuit voltage is above 2.1 volts per cell (12.6 for 12v batteries and 16.8 for 16v batteries). Improper charging can cause damage that is permanent and will VOID THE WARRANTY. If you are unsure if your charger is AGM compatible, please contact the XS Power Batteries Tech Support Department at 888-497-7693, or email us at [email protected] for more details.

If you are like me, you are tired of the toggle switch. We have a new solution. Today i opened up the pre-sale on the OM-1, the TM-1 F, TM-1 C and VM-1 HV. They SHOULD ship around the first of September. Notice on the website i have offered special discounts for those that want all three, or three of a particular model. IF YOU ALREADY OWN A VM-1 YOU CAN EMAIL US AND WE WILL WORK SOMETHING OUT FOR YOU TO GET IN ON A DEAL. visit: http://www.wcCarAudio.com (soon to be on many more sites when officially released) sorry that we are evolving and some of you early adopters miss out as times changes...but i will do my best to make you happy if you truly want a 2nd or third unit. Anyway, here is the latest. I will upload the OM-1 video this week as well.

Hi! Are this box good for two 15. XL's m2 on AQ3500 at 0.5 ohm's load. ??? 7.2 cu. with 90 sq.in of port 18" length. car - audi a6 c5 1998 Trunk. Sub and port look to the front and sealed off.

Time has come to announce the official Pre-Order of the all new SPX-525 and SPX-65 Component Speaker Systems. We announced information on these awhile back and production has finally finished and they are in route to our facility. Pre-Ordering is now open on these 2 new models, which were designed to be a very high end 2 way component speaker system. R&D took quite a while with these and we are very excited about this line and its performance, as we think you will be also! ETA : September 10th, 2013 Pricing SPX-525 5.25" 2 Way Component Speaker System Pre-Order Price = $200.00 Normal MAP Price =$264.99 MSRP = $379.99 SPX-65 6.5" 2 Way Component Speaker System Pre-Order Price =$210.00 Normal MAP Price = $279.99 MSRP = $399.99 To Order : PayPal the Pre-Order price of whichever set you are looking to order to [email protected] and we will process it and ship the order as soon as they arrive! These will start shipping to customers by Sept 10th, possibly earlier! SPX Component Features Die Cast Aluminum Basket with Diamond Cut Chrome Finish High Quality Butyl Rubber Surround PMI Composite Multi-Layered Cone 1.35" High Temperature Voice Coil 25mm (1") Neodymium Magnet and Aluminum Dome Tweeter 12dB Passive Crossover Network Impedance : 4 Ohms SPX-5.25 Technical Information Premium 2 Way Component Speaker System Frequency Response : 55-20,000 Hz Sensitivity : 90 dB RMS Power : 160 Watts (Pair) Max Power : 320 Watts (Pair) SPX-6.5 Technical Information Premium 2 Way Component Speaker System Frequency Response :42-20,000 Hz Sensitivity : 92 dB RMS Power : 200 Watts (Pair) Max Power : 400 Watts (Pair) Pictures

Dude.. no nut hug.. but.. i have issues with my 10k. My issue is.... it IS over passing my thoughts of what i was expecting.... straight up. And, im squishy with my gear. This DC amp, is making me smile.. period

I have pretty much all the smd products....dd-1, cc-1, 2 vm-1's, a vu-din......I love them all....shit the van build coming up is going to have a lot of smd products in it haha im going to have to make a separate panel just for them!

it went back to the drawing board after some prototype testing....we are still working on it. Everything costs so much $$$ and time though, it's tough. We are doing all this with no loans from the bank, no help from anyone, just our good word and sales - so new products really set us back. We are gonna keep doing what we can though! Thanks for the support everyone!

Dat seems to me as a very low totall.

i am going to low ball at 3675 @ 1 Ohm

i will post the guts of that too! no prob! the thing is, this amp here, is a class A/B.....so there is no way you can fit 1100 watts of class AB power into that little chassis. Class D, is a different story, that is why the smaller Monoblock amp was able to do big power. I am willing to do a Hifonics class D soon and maybe they will do rated. I will do a CEA 2006 model for sure.