Jump to content

Leaderboard

Popular Content

Showing content with the highest reputation on 05/28/14 in all areas

  1. I purchased a CT sounds 2500.1 from Patrick aka flwatersaver, everything went good and smooth, amp will be here friday so can't wait to have some real power. Awesome dude to do business with and look forward to do more in the future Thank you
    2 points
  2. Ok so the following designs are pretty basic to start with. I really didn't want anything too crazy, just a clean design with a high quality product. I am starting out this month with 2 designs. The SMD "Got SPL" head and the "Got SQ" head. I have some more fun designs in mind and as soon as i am happy with them, i will release a new one at least once a month. I want to have a wide range of shirts, designs and colors to choose from but i have to start out small. We are doing everything IN HOUSE so it takes a little bit of practice to get this just right. Anyhow, the sweatshirts....let me tell you, you will NOT be dissapointed if you buy one of these. The pullover is available with or without a logo on back. I will offer it with several different logo's as time goes but right now it's either with or without. Here is a link where these products can be purchased: http://www.wccaraudio.com/more/apparel.html Here is a few pictures. If you don't like the current logo, hang tight i have more on the way! Also, if you purchase a shirt, hat or sweatshirt and want your name on it, just email me ahead of time and i will do that for FREE!
    1 point
  3. I am going to go through and drop the SAZ-1000D, SAE-1200D, SAZ-1500D, SAZ-2000D, SAZ-3000D, and SAZ-3500D in the Jeep and do a power clamp test so we have a rough and UNIFORM comparison between the amps in the same setup. Test Frequency - 50 Hz Test Load - 4x SA-12s all in parallel for 0.4375 DCR (1/2 nominal) Test Electrical - 6x Stinger SPV-70 + 225-Amp Alternator (vehicle only at idle) Amp gain set to 1/2 - Head Unit Sub Control 10/10 - Head Unit Volume 50/50 Setting gain to half on each amp is, of course, not an exact match... but for the sake of roughly comparing the amps I think it serves the purpose. --------------- SAZ-1000D: POWER : 1040 Watts AMP VOLTAGE (measured) : 37.2 V AMP CURRENT (calculated) : 27.95 A ACTUAL IMPEDANCE (calculated) : 1.33 ohms SUPPLY VOLTAGE : 13.15 V http://www.sundownaudio.com/misc/_AMP_POWE...0D/CIMG2498.MOV * Power Clamp http://www.sundownaudio.com/misc/_AMP_POWE...0D/CIMG2499.MOV * Voltage Measurement --------------- SAE-1200D: POWER : 1770 Watts AMP VOLTAGE (measured) : DID NOT MEASURE AMP CURRENT (calculated) : DID NOT MEASURE ACTUAL IMPEDANCE (calculated) : DID NOT MEASURE SUPPLY VOLTAGE : 12.65 V http://www.sundownaudio.com/misc/_AMP_POWE...0D/CIMG2513.MOV * Power Clamp DID NOT MEASURE * Voltage Measurement ** FUSES BLEW - DID NOT CONTINUE TO MEASURE VOLTAGE --------------- SAZ-1500D: POWER : 1970 Watts AMP VOLTAGE (measured) : 49.25 V AMP CURRENT (calculated) : 40 A ACTUAL IMPEDANCE (calculated) : 1.23 ohms SUPPLY VOLTAGE : 12.85 V http://www.sundownaudio.com/misc/_AMP_POWE...0D/CIMG2493.MOV * Power Clamp http://www.sundownaudio.com/misc/_AMP_POWE...0D/CIMG2494.MOV * Voltage Measurement --------------- SAZ-2000D: POWER : 2440 Watts AMP VOLTAGE (measured) : 56.18 V AMP CURRENT (calculated) : 43.43 A ACTUAL IMPEDANCE (calculated) : 1.29 ohms SUPPLY VOLTAGE : 12.5 V http://www.sundownaudio.com/misc/_AMP_POWE...0D/CIMG2503.MOV * Power Clamp http://www.sundownaudio.com/misc/_AMP_POWE...0D/CIMG2504.MOV * Voltage Measurement --------------- SAZ-3000D: POWER : 3280 Watts AMP VOLTAGE (measured) : 61.28 V AMP CURRENT (calculated) : 53.52 A ACTUAL IMPEDANCE (calculated) : 1.14 ohms SUPPLY VOLTAGE : 12.1 V http://www.sundownaudio.com/misc/_AMP_POWE...0D/CIMG2506.MOV * Power Clamp http://www.sundownaudio.com/misc/_AMP_POWE...0D/CIMG2507.MOV * Voltage Measurement --------------- SAZ-3500D: POWER : 3660 Watts AMP VOLTAGE (measured) : 65.84 V AMP CURRENT (calculated) : 55.58 A ACTUAL IMPEDANCE (calculated) : 1.18 ohms SUPPLY VOLTAGE : 11.9 V http://www.sundownaudio.com/misc/_AMP_POWE...0D/CIMG2510.MOV * Power Clamp http://www.sundownaudio.com/misc/_AMP_POWE...0D/CIMG2511.MOV * Voltage Measurement --------------- SAZ-4500D: * SAZ-4500D in prototype case POWER : 4870 Watts AMP VOLTAGE (measured) : 76.0 V AMP CURRENT (calculated) : 64.08 A ACTUAL IMPEDANCE (calculated) : 1.18 ohms SUPPLY VOLTAGE : 12.25 V *** http://www.sundownaudio.com/misc/_AMP_POWE...0D/CIMG2529.MOV * Power Clamp http://www.sundownaudio.com/misc/_AMP_POWE...0D/CIMG2530.MOV * Voltage Measurement *** - Measured different day from other amps (8-4-09), batteries had full charge so sustained less voltage drop. --------------- These are not necessarily definitive tests on the amps. All applications are different and I could have probably squeezed more out of an amp here or there... but for the sake of this test I just set the gain knobs to physically 1/2 way up. Just a rough guide to show what the amps can do! I may go back one day and do an SPL comparison as well -- as we have seen up to 1 dB increase from the 3000D to the 3500D even though the power test doesn't seem to indicate as much. With the SPL portion I would sit down and tweak knobs until I got maximum SPL per amp. I tested amps from smallest to largest (for the most part except 1200D was tested last) -- so the batteries did not have a complete full charge by the time I got to the big amps, just a few minutes of alternator charge time... that just means the bigger amps will produce more than posted if I had a complete charge. This was mentioned in my initial post so I thought I would post it here as well.
    1 point
  4. Been working on this guy for a while now... what I hope to be final prototypes just arrived a few days back. Based on our testing I am going with a 750 RMS rating on these. I won't say people will not be able to run more... but that is our official rating. They will cost $210 from an authorized dealer. Production models will, of course, have a gasket and magnet boot. ----- * Compared with SA-8 v.2 * Compared with SA-8 v.2 * Compared with X-6.5SW * Compared with X-6.5SW
    1 point
  5. 1 point
  6. I'm having trouble getting access to order a ha. Any help anyone?
    1 point
  7. EMF is a certified dealer of Sundown Audio, the site use to be SundownOnly.com before he came out with his line of woofers using some similar parts of the new Sundown series like the baskets and cones. EMF is not Sundown, but a new woofer company and the owner is a friend of Jacob.
    1 point
  8. ill post a pic ill take the rest of the pics and post them up tomorrow.
    1 point
  9. i think it was too short of notice, i had a few people show up and some other random people show up (not related to the contest)......but it was pretty short notice. I will do this next saturday, 11am. If you want to be in, i need 4 more people. First 4 get in, the rest can chill and specate, listen to some tunes.....do whatever. Now if a bunch of you show up at the same time, i will figure out a way to pick who gets in. That is if anyone even shows up lol! thanks to those that hung out on ustream today!
    1 point
×
×
  • Create New...