Leaderboard

Our ETA is roughly the end of June on these; as always this can vary a bit based on parts supplier production times, transit times, customs times, etc. Based on our average shipping time that is our best estimate. That being said this pre-order will ONLY be open to the public until April 15th, 2013 -- OR until a given size / coil configuration sells 50% of the quantity being produced. I do not want to be out of stock instantly so we are running this much shorter than our other pre-orders. This pre-order is for the USA ONLY -- check with your distributor if you are outside of the USA; if you do NOT have a distributor in your country you can check with us. The below rates are shipping in the continental 48 states; e-mail us or your dealer for AK or HI pricing. Pricing as follows : PART # // REGULAR MAP // PRE-ORDER RATE X-10 (D2/D4) -- $329 -- $280 X-12 (D2/D4) -- $349 -- $300 X-15 (D2/D4) -- $389 -- $330 X-18 (D2/D4) -- $409 -- $350 You can pre-order from any participating local or online dealer OR directly with us via Paypal to [email protected] -- you MUST include a note stating EXACTLY what you are ordering. As is typical with a pre-order the sale is final ; make sure you are not placing yourself in a bad financial situation by pre-ordering. Do not pre-order if you are on a tight schedule ; the dates are NOT set in stone. An adjusted date is not considered a valid reason to request a pre-order refund. If you have ANY doubt about waiting or your financial situation DO NOT pre-order. ---------- The X series is our 1250 RMS rated line -- they feature a 3" diameter CCAW round wire coil and our new frame, spider, surround, and cone platform. Linear x-max is around ~30mm one-way by 70% BL with a total mechanical clearance of 50mm in the motor. These woofers are designed excel in high output DAILY low frequency applications. If you are looking for a burp driver or a driver to excel on “higher” bass frequencies; this is NOT it. We will offer SPL burp style re-cone kits for them at a late date – but the stock format is not made for that. * Z v.4 12 on the left and X-12 on the right. * Z v.4 12 on the left and X-12 on the right. * New terminal blocks ! * Essentially looks like a "mini-Z" style motor... 190mm magnet vs. 220mm on the Z series / 66mm tall stack vs. 75mm tall stack / thinner steel / less expensive round wire coil vs. flat wire in the Z, etc, etc. ---------- Preliminary Specifications : ** The production models have a stiffer surround which will result in an FS about 5-10 Hz higher, higher Qts, etc. They will also have a slightly tighter gap which increases the BL a bit ** X-10 D2: Re : 3.63 ohms Fs : 27.9 Hz (Stiffer Surround = 32 Hz) Qes : 0.43 (Stiffer Surround = 0.49) Qms : 4.7 Qts : 0.39 (Stiffer Surround = 0.45) Le : 4.11 mH Sd : 366 cm^2 Vas : 19.47 L BL : 21.67 NA Mms : 317 g Cms : 102 uM/N (Stiffer Surround = 75.16 uM/N) Sens : 81.66 dB 1w/1m X-10 D4: Re : 5.96 ohms Fs : 29. 15 Hz Qes : 0.54 Qms : 5.26 Qts : 0.49 Le : 6.14 mH Sd : 366 cm^2 Vas : 19.06 L BL : 24.45 NA Mms : 297 g Cms : 100 uM/N Sens : 81.14 dB 1w/1m X-12 D2: Re : 3.7 ohms Fs : 24.35 Hz Qes : 0.37 Qms : 4.38 Qts : 0.35 Le : 3.76 mH Sd : 457 cm^2 Vas : 38.02 L BL : 22.35 NA Mms : 333 g Cms : 127 uM/N Sens : 83.35 dB 1w/1m X-12 D4: Re : 5.84 ohms Fs : 26.43 Hz Qes : 0.48 Qms : 4.48 Qts : 0.43 Le : 5.18 mH Sd : 457 cm^2 Vas : 34.38 L BL : 25.16 NA Mms : 313 g Cms : 115 uM/N Sens : 82.96 dB 1w/1m X-15 D2: Re : 3.68 ohms Fs : 20.51 Hz Qes : 0.42 Qms : 4.81 Qts : 0.39 Le : 4.00 mH Sd : 729 cm^2 Vas : 107 L BL : 21.79 NA Mms : 422 g Cms : 142 uM/N Sens : 85.17 dB 1w/1m X-15 D4: Re : 5.78 ohms Fs : 20.88 Hz Qes : 0.52 Qms : 4.94 Qts : 0.47 Le : 5.99 mH Sd : 729 cm^2 Vas : 103 L BL : 24.85 NA Mms : 422 g Cms : 137 uM/N Sens : 84.34 dB 1w/1m X-18 D2: Data not available X-18 D4: Re : 5.85 ohms Fs : 20.5 Hz Qes : 0.57 Qms : 5.61 Qts : 0.52 Le : 5.92 mH Sd : 1140 cm^2 Vas : 237 L BL : 24.79 NA Mms : 470 g Cms : 128 uM/N Sens : 87.22 dB 1w/1m ---------- PHYSICAL SPECIFICATIONS :

Because he tried to justify the price being more than double of what Jacob plans on selling it for, with 3 different people lol. " This sub isn't even out yet, it comes out in a few months, so this is a steal." "Sub doesn't come out till summer of 2014, so this is a great price..." Blah blah. Just wasn't too fond of him trying to get over on some unlucky noob that may have taken the bait.I could understand if it was an iPhone 6 or something because there are a bunch of sheeple out there that would pay three times as much for it. I just couldn't justify watching that thing be listed like that. ^^^ this. There is no justification to that asshole trying to fuck some poor noob over for that amount. Dude is a c***sucker. He straight out lied to multiple people on what he actually paid for it to make it look like it really is worth that price. Fuck that and fuck him. And if anyone thinks its ok and just "business" please speak up so I can mark your name on my list of assholes to NEVER buy from.

Good luck supporting motor weight on that tiny basket

If you are going to go custom, go really custom. Have the basket come down and surround the motor to lessen the stress on the motor bolts haha

nice design bro i would buy it for sure

Make one, and I will take it for like $20 or something, i'll test it out and let you know how it performs lol looks bad ass though Beast 18

Because he tried to justify the price being more than double of what Jacob plans on selling it for, with 3 different people lol. " This sub isn't even out yet, it comes out in a few months, so this is a steal." "Sub doesn't come out till summer of 2014, so this is a great price..." Blah blah. Just wasn't too fond of him trying to get over on some unlucky noob that may have taken the bait. I could understand if it was an iPhone 6 or something because there are a bunch of sheeple out there that would pay three times as much for it. I just couldn't justify watching that thing be listed like that.

Thanks Jeff... You were top notch in every way also... thanks..

i might do the body work on it and plasti-dip it. I was thinking white with the silver gloss and black wheels. Make this car a color nobody ever thought it would be. I LOVED my IS250 when it was that color and for the cheap i can make this thing look pretty fresh

Do work I been waiting for this rebuild to happen

tuned for driver side man.. played airforces at the fcbc show 148.3 average in kick 147.7 average on dash 146.9 average at the head rest