reedal

What andru said. I would go ahead and buy a 91 and a 92" belt, try the 91 first but if you dont have any free play with the tensioner, use the 92. Gates is good, or AC Delco, goodyear gatorback. Belts are pretty important, so finding the cheapest option wont be the best idea in my opinion

Stock length is ~93 inches, go to an auto parts store and see if they can find you one thats 91-92 inches.

I went out on a limb with this one, and I'm actually not disappointed.

1.21 jiggawatt dBs

Thats good stuff. Excellent choice.

You can buy any case you want and some foam packing material for it and cut the shape of the tools yourself.

@sideshow_kustom is the resident sundown 6.5 expert i believe, as thats really all he messes with. Dont know if he comes around much anymore. Have him on facebook though.

Went to a beer, bourbon, and bbq fest this past weekend. Tried a lot of new bourbons, quite a few i was not fond of. But lately, ive been on a Jim and orange juice kick.

Glad it worked for you ?

WinISD is picky. Triticum gave me a good method of inputting parameters for it. The suggested procedure for entering driver parameters is following (check first that "Auto calculate unknowns" option is checked): 1. Enter Mms and Cms This gives fs. If either is not available, then enter fs and other parameter. 2. Enter Sd, Bl and Re Now, you should get all but Qms (and Qts), Vas. Please note that Vas may not match exactly what is specified by manufacturer, because exact value of Vas depends on environmental parameters. See FAQ. 3. Enter Rms or Qms. Either one will do, although I tend to prefer Qms over Rms, because it can usually be measured in driver measurement procedures. 4. Enter Hc, Hg and Pe. If Hc or Hg or either is available, then enter Xmax and optionally either Hc or Hg if available. 5. Enter number of voicecoils. This procedure is most accurate. Also note that it also calculates true SPL (1W/1m) value. So it might not match the marketing SPL value, which is generally somewhat vague. Not in all cases, though. 6. Correct Znom, if necessary. If there are several voicecoils, then you must be careful when entering parameters in that case, because many manufacturers give Bl in voice coils in series, because it yields double value for Bl against parallel connection. If driver manufacturer gives Qes, Bl and Cms or Mms, then you can check how Bl is specified. For that, you can enter following parameters to calculate Re: Qes, Fs, Mms or Cms and Bl. Connection mode can be changed by changing the combobox selection. The driver editor then converts Bl and Re values accordingly. Equivalently, you can check for Bl by entering: Qes, Fs, Mms or Cms and Re (for desired connection mode). If you enter resistance for parallel connection and get about half of advertised Bl, then you know, that Bl was specified that way. Like in Driver-tab in project window, you'll probably noticed the driver icon in bottom of the driver editor window. you can drag the driver object into some project by just dragging the icon.

You’re going to change offsets for each song you play? Better stock up on 9v batteries.... as for -7.5dB, DD-1+ version has a screen that lets your set custom offsets. If you have the basic DD-1, then check out this post

I'm drinking corona. Finally back home, ready to make some changes to the Harley, Tahoe, and hanging out with my wife and Husky. He's gotten massive since i left. gotta make sure he remembers whos boss between us

Thank you.

I'm on USS Monterey.

been talking with XS, about to pull the trigger on 4 banks of caps that way they're standing by when I get home, and then I'm gonna work on getting some Havocs I don't really want to go through and update all of the pictures to get rid of the photobucket trash, but I will try to find some time when I am back in the states and able to. This build will be revived!

That would be nice. I'll have to remember those plugins when I return to the states and can use my laptop again, in case it's unable to be integrated to the forums. Thank you.

I don't see where anyone said anything about you getting a handout. Send tony an email with the issue you're having, and I'm sure he'll help you figure out or fix the issue for next to nothing, rather than make you purchase a new tool. [email protected] can't really go wrong asking the engineer behind the product to help fix it.

i doubt it's the age of the DD-1, and much more likely to be your stock HU

are you checking for HU volume level distortion, or you've already found that, and now checking LC2, or checking amp? that will also help determine the cause if a new 9v battery doesn't help. They do get sapped pretty quick when they sit, though.

good work

interesting turn of events with the hearse....

I went to the first Chive Fest in Chicago in '14, and spent the day/night switching between American honey and some other drink that had cabo wabo in it. the honey definitely goes down pretty easy.

i wouldn't think there'd be any issue with a jump. I have exchanged emails with XS and they have balancing circuitry to keep everything level. here's the thread they started about their "SuperCells" https://www.stevemeadedesigns.com/board/topic/194860-xs-power-supercell-ultracap-q-a/ I thought there was another thread or two, but I couldn't find it.

i was looking at their banks too. I don't think anyone on here has picked one up, or if they have, they didn't mention it.