StreetMetalBen Posted October 9, 2012 Author Report Posted October 9, 2012 What do you want? T/S parameters or power handling or what? Power handling... If it stinks on clean power, back it off a bit lol. Haha, yes i would like to mainly know its true power handling. I'm running a RF 600.1Bd. Which is about 750RMS at 2 Ohms. and it sounds clean even on full gain. and even after an hour of constant bumping, its only mildly warm. If you have it at full gain you're doing something wrong. Please Explain. The Amp Doesnt have a bass boost knob, its only a gain and FS Adjustment.
C-Fizzy Posted October 9, 2012 Report Posted October 9, 2012 Well considering you live in orange vale and those cones look very familiar. The guy that built that sub lives in citrus heights. You can pm him on here (if he still gets on anymore) and ask if he remembers the ts specs His screen name is forevrbumpin Or something like that. under construction I hate People with crappy primered cars rolling on hubcaps that are louder then me. u hate c-fizzy?
OrionStang Posted October 9, 2012 Report Posted October 9, 2012 face to palm SMD Super Seller My Feedback Thread
Kyblack76 Posted October 9, 2012 Report Posted October 9, 2012 face to palm And ill go with PALM to FACE we got er covered SMD SUPER SELLER The Burban Build Blazer Build sold Acura trunk build sold
kickass audio Posted October 9, 2012 Report Posted October 9, 2012 Im not trying to start a shit storm but forevrbumpin is a rip. I sent him my 12" kicker cvx and it was sent out in december of 2011 and i have had communication back and forth with him since day one up until June 2012. The last email he sent to me said that he was not happy with the results of the recone and probably wouldnt charge me for it but i never received any pics of the "finished" reconed sub nor did i get the recone shipped to me so i could recone my other 12" cvx and i also did not get the basket & motor i shipped to him in the mail. It may be a pile of garbage sub but im still pissed i was fucked and paid the shipping and his fee to fix it and not get anything back. 2004 GMC Envoy1 XS power S3400 batt under the hood and 4 XS Power D3100's battery installed in the rear by the amps0 gauge power wire from front to backAlpine iva-w205 touchscreen dvd/cd/mp3/ipod/am/fm/gps headunitSundown Audio SAX-200.4 amp for my mids and highs8 gauge speaker wire from amp to woofer270 amp Mechman AltRockford Fosgate T1652-s component speakersRockford Fosgate 3Sixty.2 sound processorRca's from Rockford Fosgate and Monster Cable14 gauge speaker wire for the mids and highs1 18" Ascendant Audio SMD Dual 1 ohm with custom Black & Blue carbon fiber and hand signed dustcapBox: 5.66 cubic feet net volume box tuned to 30.13Hz with 1.5" wide wooden dowels and 1.5" thick baffle1 DC Audio 5.0k amp wired to .5 ohms nominal with an imp rise of 1.35 ohms for the single AA SMD 18"Future Vision 8000k 50w bi-xenon projector HID's with 4300k 35w fog lightsLink to my build: Buildupdates/progress
RooTxBeeR Posted October 9, 2012 Report Posted October 9, 2012 Im not trying to start a shit storm but forevrbumpin is a rip. I sent him my 12" kicker cvx and it was sent out in december of 2011 and i have had communication back and forth with him since day one up until June 2012. The last email he sent to me said that he was not happy with the results of the recone and probably wouldnt charge me for it but i never received any pics of the "finished" reconed sub nor did i get the recone shipped to me so i could recone my other 12" cvx and i also did not get the basket & motor i shipped to him in the mail. It may be a pile of garbage sub but im still pissed i was fucked and paid the shipping and his fee to fix it and not get anything back. That's somewhat your fault, should have gotten on it and figured shit out if it has been that long. File a claim on paypal or something. On 11/20/2012 at 8:54 PM, AMI CUSTOMS said: Turned mine up today at a light, guy next to me his steering wheel started moving and he looked over at me like I was a magician lol. On 5/9/2012 at 8:45 PM, skittlesRgood said: fuck the plating. look at what the main metal used is. you could buy unicorn blood plated terminals but if its just covering up dog shit, whats the point On 4/10/2013 at 12:26 PM, mrd6 said: I'll admit, half way through sanding that fiberglass in the rain and cold while I was all itchy I was definitely starting to question why i was doing this haha Soon To Be '04 Ford Escape US Alternator 280A Hairpin D4800 Under the Hood (6) XP3000's in Rear 1/0 SHCA & XS Power 4 runs to back TORK2 kit from Tony @ CE Auto Supply Pioneer DEH-80PRS DD AW6.5 (2) per door *Tweeter Unkown* DD SS4a & C3d (2) SCV4000 @ .5Ohm (2) 15" Sundown Zv5
Kyblack76 Posted October 9, 2012 Report Posted October 9, 2012 Want to know the end all be all to what your driver is doing? http://www.stevemeadedesigns.com/board/topic/151629-smd-im-sg-impedance-meter-signal-generator-presale-started/ enjoy....... SMD SUPER SELLER The Burban Build Blazer Build sold Acura trunk build sold
StreetMetalBen Posted October 10, 2012 Author Report Posted October 10, 2012 I would like to say, That forevrbumpn is a good friend of mine, off the forums. and i believe he owned this sub at one time. But to my knowledge it was not built by him. In either case, i tried contacting him, but he has been out of cell range. He does not build subs anymore, and he sold off all of his stock.
SnowDrifter Posted October 10, 2012 Report Posted October 10, 2012 What do you want? T/S parameters or power handling or what? Power handling... If it stinks on clean power, back it off a bit lol. Haha, yes i would like to mainly know its true power handling. I'm running a RF 600.1Bd. Which is about 750RMS at 2 Ohms. and it sounds clean even on full gain. and even after an hour of constant bumping, its only mildly warm. If you have it at full gain you're doing something wrong. Just throwing this out there. It's not probable, but is still a possibility. I have seen some decks with such a low preout voltage that the amp won't distort even at full gain. ~~~~~~~~SAY NO TO PHOTOBUCKET~~~~~~~~ Snow's DD-1 tracks here: https://www.stevemeadedesigns.com/board/topic/167433-snows-dd-1-tracks/ My take on OFC vs CCA: https://www.stevemeadedesigns.com/board/topic/110381-things-that-piss-you-off-in-the-car-audio-world/?do=findComment&comment=2461444
STEvil Posted October 10, 2012 Report Posted October 10, 2012 What do you want? T/S parameters or power handling or what? Power handling... If it stinks on clean power, back it off a bit lol. Haha, yes i would like to mainly know its true power handling. I'm running a RF 600.1Bd. Which is about 750RMS at 2 Ohms. and it sounds clean even on full gain. and even after an hour of constant bumping, its only mildly warm. If you have it at full gain you're doing something wrong. Just throwing this out there. It's not probable, but is still a possibility. I have seen some decks with such a low preout voltage that the amp won't distort even at full gain. Yup, and no matter the pre-out voltage of the deck, he set it wrong to get the claimed power he thinks he's getting. MickyMcD - "Capable of making some serious trouser flapping volumes at where's-my-testicles frequencies, the Servo-Drives used to be fairly jaw dropping..." Any time you have have a power wire next to your frame put some rubber hosing (or cut up an innertube) around it. The wire is bound to wiggle (due to driving or flex) and the casing will eventually wear through. Hammerdown... 1% no links to outside websites, business related FB/YT pages allowed.
Recommended Posts
Archived
This topic is now archived and is closed to further replies.