How much did you pay for your sub box (only the box not install)

[alaskanzx5]

I have built 2 boxes and haven't broken 100 total yet. First was like $50 second was $36. O ly had to get wood because I had plenty left from the previous box. My next box will be for 2 15s and ill brake 100 maybe 150 for it. Going all out on that box with wooden dowel bracing, double baffle, better wood glue, sanding, painting, and might go with tnuts for mounting the speaker.

[ChevyBoy95]

For My 4 15's Wall.....

6 Sheets of 3/4" MDF = 32 x 6

6 4' Angled Steel = 8 x 6

Screws = 30

Paint = 15

Fabric = 55

Glue = 12

Bits = 20

Resin/Glass = 25

Pocket Hole Jig (had to build it in the truck) = 60

Basically w/ Some errors in cost, roughly 450-500 bucks in Materials.

[Noel989]

I paid for designs+box about 225 finish with vynil

2-4 days

For an 18" sub

Next box I built for a 10" I spent loess than $40 on materials and like $12 iirc for the design from ram

Who do you use local?

Ivan from entrend (or something like that) he's one of the guys from xponent

The wrapping wasn't that great considering he does interior for cars. Or maybe I was expecting to much

I think you've seen it a long time ago at Greg's shop.

[slowfkncar]

MDF+screws+fiberglass&resin=65$ for a 6 cube enclosure that burps a single 15 in the 50's. For the 500$ y'all pay for a box you could have built it 4 times with that much money. With spare wood left over and an increase in wood skills.

[n8ball2013]

ive got about 9 sheets of mdf. unknown amount of 2x4s. threaded rod and hardware

mat

2 gallons kf resin

screws

2 gallons of glue

now I didn't use all nine sheets but large panels arent exactly good for multiple sheets. someone can add that up. I dont want to know

[Ninja_v1.0]

$1 bob

[CaptainWhoosh]

To have my box designed, built, carpeted, and delivered I onlt paid $250. Considering how good it sounds and how well it fit and performs I feel like I got a smoking deal. Check out my build thread.

[bighossf150]

9 sheets of mdf

80' of angle iron

20' of threaded rod

2 gallon s of glue

4 gallons of resin

A lot of chop mat

2 boxes of screws

2 cans of paint

3 spray cans of bedliner

1 can of 3m 90

3 yards of crocodile vinyl

Maybe $700-1000

[SlamminBeats]

there are too many factors, 4 18s will cost more in materials and time than 1 8.

What box finish?

What type of port? 4th 6th slot?

Type of wood? baffles etc etc etc etc. A box for 2 8s could become more expensive than a box for 2 18s.. all based on material and finish.

[Ahmed Johnson]

about 90, but I used fiberglass resin and I had alot of extra shit. The port was an exhaust fan duct and a quikrete tube I got from my job. I was gonna buy one but after a very wise member here told me it isn't as hard as I make it sound plus I got all the tools and time so I said fuck it. I would've used a house speaker box before I paid 400 though