fyerbyrd22

yes, i tried many different variations back there...headunit was set flat the whole time as well, no additional EQ in the vehicle

i was setting gains and filters on Tuesday for 4 sub amps...each pair was strapped, then gain matched..used the dd-1 to find which would be the masters, checked vac and set to the lowest amp...lowest amp was already set clean at 57.2vac so i used that amp as 1 master, and set another amp to match with the cc1...checked vac, and the one amp was 57.2vac and the other was 58.4vac...not enough to make a difference really, but still inaccurate nonetheless, even tho the SMD meters say it was correct then i used the cc1 to set filters..no problems with the lowpass but it would not work on the subsonic...it did read signal but would always say that i needed to go lower (tried 28hz and 35hz i believe) even tho i was all the way down...whatever, left both master amps all the way down on subsonic then went to use amm-1 and it wont read live power..tony told me it needed an update but it would still read tones, not music...tried music, tried tones, and nothing worked any feedback on this would be GREAT..spent alot of money on these tools to have ease of use, over using my scope and so far, they have not been worth it the slightest...is it something that i am doing wrong?

then the agm was bad...mixing agm with lithium helps, not hurts...unless the agm is already shit

never had issues in the past 10yrs with them until last year...received multiple wrong items, missing items, site being wrong about what harness goes with what, etc...ive spent north of $10k with them and they always go in and see that when i bitch...still causes headaches and makes me want to go somewhere else because my last 4-5 orders have all had something wrong, be it not in stock, arriving later than expected (causing me to cancel installation appointments), not shipping out for several days...they have gone downhill noticeably in the past year

Philadelphia phillies

i know for a fact i did it on my opti6k before i got rid of it and i think i did my taramps too

u havent attempted using it on a brazilian amp?...im pretty sure (i dont remember 100% honestly) i tried it on my taramps and it always showed clipping, same thing with my opti6k...i couldnt get any signal on the deck without distortion light on...it was a first run one tho and i heard some had issues...got me a dso nano and everything worked fine

so why dont these work on brazilians?

use uvc2000 in your resin and your resin will dry in like 5min in the sun...then use sonus matter body filler...quickest, lightest filler out..blows away rage gold...will LITERALLY cut your time working on those doors down to a fraction with that combination..with those specific pods, u could make like 5 sets in a day

entered!

entered!

wow, that turned out amazing

3cu per 12?!

i kno this is a revival from the dead but its still useful...whats the specs on the box??...im doin 2 of the sa10 on 3k so this is right up my alley