Leaderboard

Yes that tells me you don't know car audio, I owned lots of 4ch amps and this opti 250x4 is the best so far.. The only downfall is the size. It's like almost 3ft long so if space is an issue,it's not the amp for you, but if u want a powerful clean amp this is the amp you want. Gotcha, I will alter my opinion to match yours from now on. Thanks for the insight.

Shown above: SMD TM-1 (Temperature with 3 stage fan output), SMD VM-1 Analog LED Volt Meter, and SMD OM-1 Output Meter. Available at http://www.wcCarAudio.com and many other online outlets. Do you own 3 of these LED meters in ANY combination? Well you are in luck. I will send you a single din unit for FREE! (Black ABS onlly) You just need to pay shipping, whatever that is. Deal? Same for VU-Din owners. The new unit i am making is going to be FREE to anyone who can prove they purchased one. They WILL still be for sale so i don't want to hear any complaining. This material i am using isn't cheap. BUT i highly appreciate you guys who have purchased multiple SMD products or a nekked circuit board VU-DIN and i plan on hooking you up. If you plan on buying 3 LED meters or just need one or 2 more to complete your 3, LET ME KNOW! Ill toss one in the box. Also, i have plans to make a double kit with just 2 and a logo in the center of some sort. I also have plans to do a QUAD bar! It's no longer any sort of "Din" at that point but for those that want one i can do it. Do you own one of the products that will use a housing like this? Email me at [email protected] and we will arrange shipping and get yours out. Be the first to try one! Should be 100% ready by tomorrow. Stay tuned! NOTE: if you need an MDF unit instead of an ABS one, it's no problem, just let me know. I just haven't made them yet that's all. I will whip some up tomorrow.

today i spent a good portion of the entire day trying to get this new triple LED meter kit just right. It might look easy in the end but there is a lot to this. Two different recessed area's, one for the lens to sit flush and one for the circuit board to sit flush, yet suspended just above the lens. Both cut down to the thousandth of an inch. The entire thing fits like a dream into a single din slot. I plan on making these out of ABS, multiple different colors including smoked, clear and even mirrored acrylic. I will also make plenty of these out of MDF so people can glass them in for custom jobs. Once i get good at this CNC i will make some aluminum face plates as well. I am sure i can do it i just have other stuff to finish first before i take that "plunge" (no pun intended) The lab. Although most of my designing ends up being on the PC closest to the CNC. I use both depending on how long i think i will be sitting before making the first cut. An EARLY proto using some smoked acrylic scrap i have laying around. It is starting to take shape! the smoked acrylic on the right is a scrap piece and it is what i used to develop this before actually moving it to the ABS sheet. The ABS sheet is 3/8 and not exactly cheap. I made a bunch of trim rings from yesterdays VU-Din project while i was busy designing today's piece. I made a lot of these moving stuff around like .003" at a time because shit was off just a little. OR maybe i decided i wanted to do a 2nd recess because i didn't want the board smashed up against the lens. Making sure it all went in took a few try's. everything snaps in really tight. If someone purchases this or otherwise get's their hands on one, i suggest you put a few drops of glue on the back just in case. But they are in very tight with a nice pressure fit.

Are you saying I don't know my opinion? That's all I stated.

i would buy a DC or RF before I would run the Lanzar for free if that tells you anything. but again, that is just my preference.

Ya right....i have a tough time believing that. but if that what works for you.

A 320 6 phase alt should be enough alt for a 7k. Especially with a good battery bank. In theory you should be more than good. But, the only sure way to know is to try it

Yes you will be able to play multiple songs.

That's awesome! Could you tell me what song that is please?

man i tell ya, i don't know who is who's bitch. At first i was calling the machine my "new bitch" but look who is getting there at sunrise and leaving past dark every single day for 3 weeks. ME. lol. Like 12 hour days.....

goddamn, another good idea. making that new machine work man

Killing me man. I don't want to cut my dash again and here you go with this ugh