Leaderboard

getting close to having the wall done and wired up on 5 of the small amps( swaping to 5x 2500w rms amps in the near future , still need to seal it to the b pillars and other work but i got plenty of time before the next comp

progress is slow but i got the port cut and in today for testing and 3 out of the 5 sub amps installed its enough for some low power testing /checking making sure the enclosure doesnt have anything loose etc hopefully ill have enough time this weekend to get all 5 wired up and playing

Sorry I've been MIA. As for the 74AH pro I'm not sure you should get it. I'm second guessing my purchase already and I cant send it back. I'm still going to try and use it but i wish I would have done more research. Apparently these cells have a really narrow voltage range. It might work for me but I'm still a ways off from testing them out. ----------------UPDATE 2/25/24--------- I decided to revamp my system entirely. I sold everything from my old car except 2 SA x-8's, my SIA2500.1d, and my wiring. I got rid of my Infinity Kappa 3-ways and purchased Infinity Kappa Perfect 3-ways. The new setup is as follows Helix M Four DSP running my tweets and Midrange 2 Sound Digital 800.4's running my midbass, center channel, and rear speakers SIA2500.1d running 2 SA X-8v.4's - 2ohm's @ 2000watts - Also contemplating building a T-line enclosure for these Also I decided to do custom a-pillars. So on with that! These are my Infinity Kappa 300m midranges all taped up and ready to be trimmed. The two things i dislike about these are that the mounting tabs add an inch of width and they don't come with grills. Gonna have to fix that. Left one trimmed, on the right you can see the problem. These are some funky a pillar pods I found on amazon. I'll still need to do some fiberglassing and trimming once my second set of a-pillars come in. Not gonna modify the originals. Thank you skar audio for the sacrificial grill Fit's but is not done. This is a tinner's hammer hammer. Time to shape some metal Not perfect but you can see what I'm going for. A can of zyn fit's nicely to help with the shaping Also had some steel round mesh from another project So I decided to try that as well Side - by - side of the two grill options Now for the tweeters. The flush mounts we too big so originally I was going to use these. But it looks hideous and bug-eyed. So I trimmed one of the flush-mounts to fit. And ditched the black grill. The steel looks better imo, especially when matching the tweeter. There's still a lot I need to do to these. Currently the grill is sitting on the midrange surround so I need to fix that, and the pods still need to be fiber glassed to the a-pillars and covered with some kid of material. But that is for another day.

closer , waiting ont he first 2 baffle layers to dry and then i can glue this one to those and install it for real

getting the inner shell done tonight

Who remembers when I use to post my "REALTIME" videos? Well they are coming back

getting older sure does suck

recoil has new amps coming amp ill be getting 3x of the 2500's to replace the 1200's , i also did start to deaden the doors got the driver side door outer skin done today , hoping to get one door done each day , i think im going to get some 150 mil stuff to do the inner panel with instead of using the 394mil stuff on that as well

Joe X design is a good ported box. Corner 45s don't do much for a subwoofer box besides brace it and eat up internal volume. If you wanted a similar design with a bit more internal volume then I do have one free on youtube. Feel free to do basically whatever with it. You could also try to design a mass loaded transmission line with offset driver/stub. It's basically a lot like a ported box but attempts to cancel resonance in the enclosure to give more bandwidth.

Here is a box made to be similar to the one you linked but a bit better for the lows and the cutsheet can be completed just with a table saw and a jigsaw, no need for router: Power: to sub(s) rated, amp subsonic filter to 28Hz, minimum port clearance 4", figure is just an assembly guide:

That box is designed for SA-8s as a result the X subs are going to find themselves in a too small box with low port area and tuned too high, surely above the 36Hz specified as driver displacement for X subs is larger, maybe it will get to 38Hz or more and could experience some port noise. Used to a large box tuned very low you will definitely notice a loss in bottom octave bass. Regarding to your question, you can always strengthen the box but if it is made of cheap thin 5/8" wood then it is not impossible. Lastly the pre cut sub holes cannot fit X subs, you will have to work on the holes. Overall that box seem expensive and not adequate for the subs. I would lift up the seats and do a proper custom enclosure for those subs and even then you probably have better bottom octave bass right now than you will ever get with some 8s.

finally got started on it heres some pics form today tipping out the trunk build and starting to mock panels up front baffle will be tripple thick with dbl layer everywere else inner panels are a lil bit cheaper ply with the outer layers being 13 ply layout is going to be 3 subs across the top , and 2 on the bottoms on left and right of the baffle with a 225sqin swapable slot port tuned for 28hz for daily use and more then likley 45hz for burping

From March 15th to March 20th, revitalize your projects with top-notch American-made sound and heat insulation from Second Skin. Whether you're tackling a car restoration, home improvement, or any other project, our high-quality insulation products are here to enhance your experience. Use code SPRING15 at checkout to enjoy a generous 15% discount on your purchase. Why Choose Second Skin? Premium quality American-made insulation Superior sound and heat insulation properties Trusted by professionals and enthusiasts alike Don't miss out on this limited-time offer to save on your Spring projects! Upgrade your insulation and upgrade your results with Second Skin. Visit our website now and start saving! 🛒🔊🔥 TAKE ME TO THE SHOP →

I did not go the LOC route. I have a helix Dsp with high level input. And yes that was the only issue I had. We even adjusted the internal resistance of the DSP. Otherwise it would have been perfect im definitely lucky on having an easier time to get an aftermarket headunit with trim plate

I have a VW Golf (2017). It has the basic entertainment system. I wanted to go with a high level to my DSP. I had nothing but problems going that route. The VW head unit is looking for a specific resistance at the speakers. I was constantly getting distortion coming in and out depending on the recording and song (It would happen multiple times through a song). This happened on multiple music platforms. It didn't matter how we set the headunit eq or volume at. If it was flat, below flat, frequencies turned down or up. It always came back to distorting at some point. I did get the work completed through a reputable shop and was thankful that all the diagnosis did not cost me anything. There is a unit that can be installed that integrates the VW head unit and has RCA outputs (I don't remember what it is) Ultimately I had went to the aftermarket headunit. Zero issues since.

Some 56 square inches of total port area, two ports half that number for each port.

When you have more than one sub you pick a spot in which both subs will see the same load so not B.

Subs get stinky when they had enough power, but I wouldn't try that method on type rs, that is a method more adequate for SPL drivers. BTW make very sure you entered valid data to WinISD or you may be led to the wrong conclusions.

You need your new equipment professionally installed, that includes new wiring, battery, setting your gains correctly and such. Talking over the internet looks like is not going to be helpful in your case. You need a person who is properly trained and has the tools to help you.

Correct. The reason for so many is due to some people using multiple runs of power wire from the front of the vehicle to the back. In my truck for example I have 9 positive runs of 1/0 and 9 negative runs of 1/0 (18 total) coming from my 3 alts under the hood to the back batteries. So when people have larger systems with over 1600amps worth of alternator charging, multiple 5,000+ watt rms amps, etc one single run of 1/0 or even 4/0 coming from under the hood simply cant handle the current load. Now take into consideration of the length of said wire which reduces its current rating, resistance and voltage drop in the wire, hell even if you're pulling the maximum current limit from whatever wire you're running your going to have to factor in heat and even more resistance. So that is why there's multiple spots for additional wires to be connected so you can adapt to your needs and overcome obstacles and restrictions in the wire. Hopefully that helps.

You can forget about impedance rise, as long as you are not a competitor or you are not fine tuning an exotic type of enclosure, you just need to have a good working electrical system that is in the level of the amp you are using, good wiring correctly installed, a good amp that does the power it claims, and proper gain settings procedures, it is worth learning about that as well as owning a cheap little scope or a DD-1, if you can source 2K to your subs you will see a big jump in output and you will be pretty satisfied with the results.

I just built my last rig not to long ago and I am already at it again. The reason I chose the parts for the last build was due to not having a mainboard that could support my new 5gig Fiber internet. There wasn't many boards in the latest gen at the time that had what I needed. You can see that build here **** This link below is the OLD 11th Gen build that is now my VR rig, you can see the NEW 14th gen if you keep scrolling**** While that build worked GREAT, I also have another issue. I have a Valve Index VR setup. My main PC runs 3 monitors and every time I want to use VR I have to unplug display ports and restart the PC. When I am done I have to plug it all back in and restart the PC again. And then after that I have to reset my monitor configuration because it flips out when I start making changes like that. Easy to put back, but a pain none the less. I just want to pick the headset up and use it without all that drama. So I decided I wanted a PC dedicated JUST for my VR. My first choice was a gaming laptop. I have one I use all the time that has an RTX 2070 in it. I plugged it in and it works pretty good (for VR). The only problem is for fast games like VR racing, it is pretty weak. Not anywhere near the quality of my PC. So I decided to build another gaming rig instead that I can dedicate to that. While trying to figure out what I was going to use for the build, I decided that my "old" rig from March (2023) with the 11th gen could be the perfect tower instead and I can build a NEW NEW for my main rig instead. I also have a spare RTX 3090 not being used that I spent $2500 on during covid lockdown. So my VR PC will be my "old" PC with a 3090 in it and I will take my 4090 and put it in the new rig since it is still the latest card. A little confusing but it might make sense by the time I am done with both of them. New build: CORSAIR iCUE 7000X RGB Full-Tower ATX MSI Meg Z790 Godlike Max Motherboard EVGA Supernova 1600 P+, 80+ Platinum 1600W PS Intel Core i9 14900k Corsair H150i Elite Capellix Liquid Cpu cooler 128G Corsair Vengeance DDR5 Asus ROG Strix RTX 4090 OC Edition GPU Samsung 990 Pro m.2 2TB (main) Samsung 990 Pro m.2 2TB Samsung 990 Pro m.2 2TB (3) Alienware 38" 3840x1600 @ 144hz 1ms (in Surround mode @ 11520x1600) I g

Jesus my guy. Come play some warzone with me. Edit- my next buy is a 240 (plus) Hz oled. Maybe the Rog rig. Not sure. May wait a tick. Monitors are just getting sooooo good. But, i want a rad oled thats wicked fast. Just 2 g7 240hz (27 and 32 inch) here. I want a nice oled.

Done!

I still cant get over how huge those 4090s are LOL. Like putting an cinderblock on your motherboard.

What is the vehicle?

dueling gaming pc’s 😁 I networked the drives so I can use the “older” pc as a storage server also. Win! The one on the left is the previous PC but with an RTX 3090 in it. The 4090 was migrated over to the new tower.

Yes that was the one to get (didn't know about the V2) will be much better off than with a full bridge, except for the size, let us know how you got it done, don't know if a seat lift can help making room for all the stuff you want there and the amp. Also hopefully you don't get another D1 sub by itself and save yourself from some headaches.

Finally got some screws so I could throw the subs in the box and see how it fits in my car. First issue I noticed is that the terminals + wire was too difficult to get into the box without ripping the wires out. So a couple quick relief cuts were needed. Then I hit it with the shop vac. After that, I wired in the subs and chucked em in the box. I pre-drilled some pilot holes and screwed them in. They're snug but not fully tightened yet. I have an idea to make the box a little prettier so they'll probably come out at least once more. And lastly just a quick test in the car. I'm gonna drive around with them for a few days to see how the space effects me. This is the average load I have in the trunk with my tool backpack, a set of rain gear, and the Milwaukee bag full of drills. Sometimes I carpool so you can just about double that for those days. I'll need to figure out something to protect the subs. Finding grills would be difficult with how much xmax these guys have. Maybe some bars or something. Shoot me any products or ideas you guys have. I'm also thinking about adding some kind of small lip to the top of the box so I could throw My toolbags on top of the box and not worry about them sliding off. Maybe some kind of cargo net. who knows. And DEFINITELY glad I'm going with 2 subs now. This box loaded is a back breaker. I May throw some straps on top to make it easier to pull in and out. 3 subs would almost require two people.

You can also setup your gains low making sure power delivered is within drivers specs. No one is to say if that distorted signal will make any difference, It's all about being prepared to prevent a bad outcome. Much luck and if you have any other questions let us know.

getting really close now

Usually the negative speaker wire output is fine to use, however on some amps if it don't work then the negative battery terminal will work as well. Most amps the negative speaker terminal and the negative battery terminal are tied together, but thats not always the case and thats really the only time you need to use the negative terminal or vice versa.

You need to specify what's your vehicle, what is the sub model the box specs and some pictures if possible. Looks like a box issue, installing a DSP could help flatten your response but not the other issues, in some situations inverting the phase of the signal to the subs can help some cancellation issues, other times box location / sub, port firing direction etc can help. try what is suggested and if you still not get results then provide the details I asked about above.

Not sure the chambers are of different sizes but even if they were with sealed there is no much difference in performance for normal to larger than normal internal volumes, say 1 cubic feet and 1.2 cubic feet will sound largely the same. If those subs are the lanzar st max12s those may play better in ported box rather than sealed. To answer your question it's better to cut a circle in the dividers rather than take them out to preserve the box strength.

figured id share my build this is my first build on over 20 years , my last build was 2x alumapro bp-12's built into the cabin of a 89 camaro, this build specs out as follows 4x sundown audio e8 v6's built my own 3.6 net cf slot ported box tuned to 34 hz the front doors each are getting 1x 8 inch dayton audio midbass , and 2x 6.5" recoil midranges along with the same in the rear doors for all the amps im originally wanted to run 2x jp23's and 2x jp34ab's but i ended up deciding to run 4x recoil audio red 1200.1 for the subs ( 1 amp for each sub at 1 ohm ) and 2x recoil audio rea 600.4 ab amps for the mids and highs unfortunately for me the biggest alt i can find for this car atm is a 250amp so im going to have to figure something out here more then likley building a bracket to mount a second alt im also building a 96ah headway bank 4 runs of 1/0 from front to back due to it being winter progress is slow even though i have most of the pieces needed to get this together first things to get done will be the alt and running all of the 1/0 runs as of right now i put the raw box in the car and im running it on a single red1200.1 and i must say i am very pleased with it on the single amp and i also got the front door baffles made and screwed to the panels but they need all the fiberglass work done which i cant do till it warms up for right now i have some pyle 6.5's in the doors that were given to me for free and the dayton 8's the amp rack itself is being built inplace of the rear seat bottoms anyways heres a few pics for the time being the one video is just them on a 60x2 amp i had laying around

I can't believe I remembered my old logins! I haven't done audio in YEARS! But I just grabbed me my first (fixer upper) SUV and was like, "Back in the day, I always said I'd do something crazy if I got me an SUV." This is the only audio forum I've ever been a part of so... Here I am, checking you guys out lol. Coincidentally, I asked this same question as I was typing the website in 😂. To answer your question though, I got away from audio and started building me some "fast" stuff. I got this SUV with a blown head gasket for the winter just to have a 4wd beater so I didn't have to drive my fun cars in the crappy weather. Once I did the gasket, that itch came back like crazy, VERY QUICKLY lol. So Im now actively installing some old stuff that I had in plastic from the last car I did audio in, God knows how long ago, just hoping it'll hold me over and not make me wanna spend some money 😂 But, Hi all! Good to see y'all AND the site are still kicking!

That is not normal. Your car is possessed most likely.

If you have a subpar electrical you can go with this: Rockford Fosgate Power T1500-1BDCP It will give you like 1200W at 4 ohm and close to 2K at 2 ohm, it is expensive unfortunately but it can work on bad electrical also fits 4AWG cable. There are cheaper alternatives, Taramps smart 3 bass and the SIA series from sundown BUT full bridge amps need costly perfect electrical, 12.5 V minimum under max load or these amps can get damaged. These type of amps better leave alone in entry level systems.

next step is paint

No, I didn't miss word it. I was just wrong. Thank you for the clarification. I thought it measured both. I must admit, I only skimmed through the manual lol.

I'm still alive...... and still an asshole!