Jump to content

getlocivic

Members
  • Posts

    1083
  • Joined

  • Last visited

Everything posted by getlocivic

  1. funny how he claims jp audio all the time even got the shirts to say it.. but dont even know if you got subs wired up right,,, somethings wrong there............hmmmmm aint even up 25% rriiiiigggghhhhttttt
  2. why bc its not some gucci mane or waka flocka?? some of the "gayest" songs are the best for sq ..and thats what he was trying to do to show how loud n clean it is not how much midbass hes got
  3. do plenty of research in the threads there have been direct tests betweent he kinetik shuriken and xs and juicebox batteries let the results let you decide
  4. never wait to do the big 3.. big 3 is a MUST upgrade factory charging lines are 8g or smaller..how can them supply.. 0g wire etc etc
  5. box is a little big.. should be fine tho for awhile till you get another box made etc.. turn the amp down and stay within mechanical limits of the woofers bigger box means less power smaller box more power
  6. LMAO, your new avatar.^ whatcha talkin bout willis thats the SMARTEST man alive why.. bc 15" subs excurt and change box size
  7. they are only 60 bux new online i picked up one local for 30 bux and that was pushing it.. at any rate a small battery int he back is better than a junk capacitor.. and check the voltage at amp while playing if it gets below 12.6 or so you need to further upgrade the electrical
  8. i only use OFC wire i never use the CCA crap and ive seen absolute wire before...real thick insulation the 2g is actually going to be 4g wire.. so i would for sure look into something better.. try looking up american bass 0g wire or audiopipe wire both are OFC and actual gauge size.. and from sub amp to subs deending on the wattage 1000w rms sub amp to 2 woofers id run 12g wire.. im running 12g wire in my install and i havnt had a warm wire yet etc..and im well above 1k rms 2k rms and more id use 10g or 8g wire for subs
  9. what? english please? the car is 1995. and has a steel frame. not a unibody. but im doing 2 runs (one pos and one neg) min, i just want to know if i should do more than just that. what 1995 car has a "steel frame" 99% of all cars n suvs are unibody
  10. not every car works well with port behind driver ive had VERY good luck with subs bottom port up top and a 1500 per sub..lol...be wayyy careful if you have electrical to support them
  11. my fi q 15 played real low 3.6 cubes net tuned to 26hz 14" per easily played 20hz bass like nothing peaked in the mid 30s too just my style
  12. ma hk 4000d draws around 350 amps right?? i had the littlebrother to the 4k and it drew mid 200ish amps.. stock alt just simply cannot supply the massive current draw
  13. the optidrive series is nice other than that they arnt good at all but the OLD optidrive is the stuff to use
  14. my stinger voltmeter has been in 4 different cars and used daily for 2yrs its never failed for me keep it in a place with minimal vibration and they last forever
  15. no alternator has a ground stud.. use the mounting hardware there aka a nice bolt.. run 0g from that alt bracket to a strut tower or directly to your underhood battery ground bc a alternator is a power source and needs a positive and neg to fully work that extra ground just completes it all and people who have batteries in trunk for stock they think they dont need a big3 bc the battery is already so close to the amps..wll its the SAME thing in any other car .. upgrade all the wires
  16. nice n low bass idk about the song.. thats got to be 1 of the gayest songs ive herd in awhile where is this going to.. is a chick song nice job for actually getting j audio subs loud n low
  17. right because the stock wires tahst arw usually 8g or smaller can supply say 4g wire... NOT the big 3 is a mUST for any system no matter how big or small it is..VOLTAGE is the key in any system
  18. ^^ listen to the man thats all the answers you need again a outstanding vendor not even trying to push a product on you thats sweet
  19. yeah i hear ya.. when i had my btl 15 fully upgraded..all options available (ufo motor) i was giving it 2800w daily and it barely got warm after 20mins of beating the crap out of it
  20. scrape off all excess stuff with a razor blade and then wipe down with alcohol also if you use a heatgun no matter the brand of deadener it always goes on easier/comforms better and sticks better too
  21. i have stuck my head in the port of a 155 156 legal vehicle so high 160s at the port?? my ears ringed for a couple days but that was it
  22. 155db and up is very hurtful as for the whole bullshit about going deaf..thats a total crock of shit i been a basshead for many many many years and herd many 150db plus rides and i can still hear (just as good before i started audio) in my book find something else to do your paper on..something that actually happens
×
×
  • Create New...