reedal

Next bits I buy are going to be from 12v tools.....have heard nothing but good reviews.

12v FTW

12v FTW fosho

I never priced everything separately. But to me once you consider time spent making all the connections, double checking that everything is done correctly, hunting down/driving/ordering different stuff online vs. the fact that Tony gives us a 10% discount and you can spend your time on other parts of your build, and just plug and play when it shows up, it's a great deal.

Yeah and considering I'm not too familiar with how to even go about wiring it up, I don't really have the time to try to figure it out now.

sons matter is pretty dope too, i need to try rage next to compare

*sonus

i love rage. (evercoat)... .. all ive used...

I can fit two and still have A/C, maybe three. Everything for the A/C is on the opposite side of the engine bay from the alt location. I'm already planning on getting the dual bracket and keep the stock alt with my singer. I don't drop much on music as is with just the stock alt, D3400 under the hood and a D4700 in the back. Lowest I've gotten is 13.3. But I'm only wired for 2600 @ 2ohms/14.4v, so it's not like I'm pulling crazy amperage like most with SUVs.

Nice. My car can't fit two alts

I know my TB can fit two, I don't see how but it can with a bracket. I haven't seen a dual alt set up in a le sabre

so then get ready to do it. You know how many times I had to do fiber runs? Too fuckig many.

Yeah I bet. Someone's always gotta break shit when you don't want it broke. When was the last time you used that 90x4 before I bought it? Besides a power on test?

I traded my car in March of 2014 so that was when I pulled it out. I dont remember when you bought it now. its been awhile. Whats up with it. You had to send it in?

the ones you don't know. it sucks when you wash your arms and you feel them

The ones you don't know for sure, cause I use hand sanitizer often at work, and I'll all of a sudden start feeling burns and can't even see any cuts anywhere, never even bled.

say the word "Rat" next time and see if they react.

J/K lol I love chinese food but only from certain spots.

I am a fan of these lithiums. Weight savings are awesome.

You can get away with less wire, less terminals and less alternator with lithium as well. That adds up to even more money and weight savings.

Would ~800A of max output total from three alts be too much for one lithium battery...? Assuming I was drawing that much current from the battery to the amps in the first place from five amps..

The 40lber is cheap enough that if you get one you should just use all of it, no not everywhere will need 100% coverage but you'll have some problem areas that will need it.

Shit Tons of Second Skin!!!! :-)

Haha

That said, i LOVE the control it has, and can do..... its a killer all in one for sure

That's what had me pull the trigger. I wanted something with control for hopefully going active one day

mine has only cut out once. i was like O.o

just like whipping a brick. cooking dope. # pyrex

is this like the pot calling the kettle black?

Got it. It was throwing me for a loop. Thanks

Yeah alignments will be done. I do that with every oil change.

you get an alignment every oil change? o_o

Yes. Personal preference.

Haha thanks.

Good shit man. Sorry I never got my gear installed so you could hear it. Still waiting on some stuff actually LOL. HAve a safe trip home.

Thanks man, it's all good. I'm sure I'll find someone on the east coast to throw me a couple demos. Maybe get to a couple comps in or around virginia

Cool. Good info to know. Thank you.

I had them on my aq/sq supertweets. One of the connections broke off, so I just crossed them over on the amp at 4.5k

if your running active, that means your not running a passive cut off..

Our Bennigans closed but got a Dublin's in the same building and pretty much the same menu.

I'm not sure if the Bahrain Dublin's had a good food menu or not.... But they have a pretty great bar

I'll give the threaded inserts a shot... Just worried that the MDF might be too soft for it since its counter sunk to almost 1/4"

what about high strength velcro for now?

deck screws? as long as you don't over torque them I have used the same mounting holes tons of times

do havocs.. if you can

How come? What would be the difference in a daily on 3.5k? I ask because I don't know.

local guy has 4 Chaos 15s in a 4th wall on a 5k at .5... shit gets downnnn

The Dayton dats is only $100.

http://www.parts-express.com/dayton-audio-dats-v2-computer-based-audio-component-test-system--390-806

The Im-sg can do it as well and there would be a few other benefits to owning one of those.

Good to know. Thank you.

Or a umik and rew. I think it can do t/s parameters. The dats system is like 30more but worth it IMHO.

yea really I have as much luck with a drill and the dremel bits then I did with a dremel

I'll have to look into the sonicrafter. Thanks Aculous, I'm making it work with 10-15 minute charge times and the sanding wheel attachment. It's messy, but it's getting the job done.

Shit I didn't even think about throwing it on my drill. That ain't a half bad idea. I'll grab some more cutting wheels tomorrow on my way home from work though. Not sure if I'll finish up cutting the excess fiberglass off tonight. The wife is home and I was on duty yesterday so I gotta spend some time with her before I catch some sleep

And then I said to hell with the used L3, I'll get the pair of L4 BNIB for $50 more. Now to just get the grilles for them all.

I got my grilles from audiointensity.com. like 20 bucks a set

Nice. I'll look into it. Thank you.

sounds fine to me

Remember, even 4ohm speakers don't stay 4ohm once they get music to them

4 ohm is just a placeholder for DC since there is no conversion from DC resistance to AC impedance.

the new dewalt 20v lithium's are hoss as fuck. same with the milwaulkee 18v lithium

Get a power converter in your car. I had to get one when my heat went out and I'm glad I did.

Both the matrix and the dremel were gifts, I knew the black and decker wasn't going to be worth much for battery life as I've never had good experience with them. I thought the dremel would be better though. Porter Cable NiCads have great life. If/when I buy my next power tool, it'll definitely be either dewalt or porter cable. I've always liked my uncles dewalt's. But I do like the matrix because every tool needed for small woodwork (mdf rings in particular ) is an atta...

Oh Kyle. You and your jokes..... That I sometimes wonder if they're really jokes...

@duck: I don't want to do that. At all. It was hard enough to get her to find an apartment she liked that put her closer to work and school.

It'd be funny if she was younger than me. Good try though.

click the red circle next to the thread on PC derp. it may be a different color based on your theme

got it. thank you. i only use mobile when i'm home. but i'm kind of unable to receive cell service on the ship, so PC is the only way to go. appreciate it!!!

on PC there is also a small clickable to the right of the thread title to preview first and last posts. its not very visible

i have it

well its d4 https://www.mediafire.com/?2f655cx9juk43zc

Cool thanks man. I should be able to adjust it I think. I'll take a look when I get home today