Search the Community
Showing results for tags 'help'.
-
Hello all. Equipment: idatalink Maestro rr2/ w compatible vehicle harness Kenwood Excelon dmx809s Incriminator audio IX6.4 @ -3db Incriminator audio ix2.1 @ -10db DS18 pro zt6; x4 Sundown SA V2; x2 XSPower D3400 Wiring is entirely Knukonceptz OFC, 0 gauge power run/ground, big three w/ the addition of alt casing ground, 14 gauge wiring runs to door speakers, Krystal Kable RCAs Vehicle: 2021 VW Passat w/fender system (bypassed amp) As title states, I am getting a slightly tolerable white noise in my newish sound system. I say slightly tolerable because I cannot hear the hiss unless there is no music playing or my vehicle is at a standstill. The white noise persists whether the car is running/on, RCA unplugged from amp, gains turned to lowest settings on amplifier (makes no difference), running a temp ground from amp directly to the battery, disconnecting the speaker wires, swapping remote turn on leads, using muting plugs on all channels, and finally running temporary speaker wire to ensure the ones I ran weren’t picking up interference. I have tested a brand new Skar Audio SKv2 100.4AB, the hiss was still present but quieter I have no clue as to why. My next move is possibly putting the amp in a vehicle to see if the noise is present still. If I have missed anything, please so share. I'm not sure if I’m just expecting too much from electronics that make SOME noise, but I’d at least expect the amount of noise a proper stock system makes which is next to nothing IF any. Are aftermarket sound systems just inherent to slight hiss/noise or am I being too much of a perfectionist with this? Thanks!
-
I'm trying to buy some recones for a pair of SA woofers and I having a lot of trouble getting a hold of Sundown to purchase the recones Does anybody know of a quick way to get a hold of them? I've contacted and talked to a couple SA dealers in DFW area (Texas) and I've sent a couple of emails over a period of about 2 weeks. And I realize there busy but it's just a little frustrating.. -
Does anyone in the DFW area have a DD-1 that can help me with my amps? I can pay you for your help. I just wanted to check and see if somebody close has one before I go and buy one for myself. Thanx
-
Whats up everyone, i'm new here and I'm really getting into car audio. Right now I have a 2004 Chevy Silverado that I threw 2 shallow P3 12's in. I really want something louder. I'm not quite ready to do a blow through, so I want my first build to be 4 Sundown SA-8's underneath the rear seat, facing the front. I want two 4" ports, one on each side. I'm extremely new to box building, but I learn very fast. I have a few questions, and I would also really appreciate some pointers & tips. Question #1: Since I want 4 subs with a port on each side of the box, am I going to need to put a center divider in the center of the box, so that I create two chambers, each with two subs and a 4" port? Question #2: The SA-8's recommended box volume is .5-.75 cu. ft. so should I simply take .5 and times it by four, giving me a 2 cu. ft. box volume for the 4 subs? That's all the questions I can think of...for now. Any tips or other help is GREATLY appreciated!! Thanks, Mike -
I have 2 15" AB HD's in a 8cubft box in the back of my blazer with the slot port facing up and the subs inverted and me and my buddy DAN have been arguing, he thinks i should put the subs non-inverted and turn the box so the port is facing the hatch, he thinks i will get one or two DB's by doing this so i figured i would ask my SMD family what they think...........WELL?????? -
Currently I have the Hifonics amp. I am expecting two new Skar VVX 12's tomorrow. I am wondering which amp out of the two would be a better match for the subs, with sound quality and spl in mind. What would the pros and cons of either amp be for this setup or similar ones? I'm asking this, because I am selling one of my old type-r's on craigslist, and I have someone that wants to trade the p1000 for my type-r. This made me wonder if this amp would be a better option for me, or if I should just hold out for cash and either keep the Hifonics or save up for an even more powerful and better amp like an AQ 2200 or similar. I don't mean to start a vs. thread, because it seems like they are rather disliked on this and any other forum. I'm just looking for opinions from others with more experience than I have. Any input would be greatly appreciated!
-
hey guys i just got a new car and sadly decided to go from my dc xl 18 to 2 12 inch DC lvl4 m2. i have read goood things about these so i am staying positive lol. my question for you guys is what amp would you recommend? i have and AQ 2200d. would i be good running this? Or should i upgrade to an AQ3500 or DC 3.5k any help would be great thanks! -
Im confused as to what dimensions my box needs to be for the SA-8 i got in the mail, i know .6 cubes and around 35 Hz, but i don't know how to construct it, i am a noob, i do need to be walked through on certain things. thanks. -
Ive been looking but havent seen anyone really do (3) v3 z18 subs. i just got 3 of them and have 3 hifonics brutus 2100d and am curious has anyone had experience with these subwoofers? Sundown says 4 ft^3 and that sounds too small. Also, this is my first real system, gathering everything i think i need. Input appreciated.
-
I've got a Orion HCCA 12.2 in a ported box and I'm in need of an amp but unsure which brand or wattage I should get. My sub is rated for 2000 rms 4000 max power. I plan to wire it down to 1 ohm so it needs to be 1 ohm stable. Suggestions? Help? Thanx
-
Hello everyone, I am planning on building my own single 12 SEALED box for my sub. The sub recommendations for the box volume is 1.37 cubic feet. I'm new to this stuff so can anyone just give me measurements of wood i need so i can go cut it and put it together? I'm going to use 3/4 MDF wood. Just give me the height X width of each side i need. please and thank you very much.
-
I basically just want to know if this design will work for my sub, my only concern is the port area, i know 14in of port per cube foot is ok, but it only has 8.5 in of port area, so comment if its good, or bad. Thanks. Sundown SA-8 D4 v.1 Wired at 2 ohms getting about 550 rms 10x23x12 box dimentions 8.5x1x30 port dimentions 34.29 Hz .64 cubes after sub and port displacement 8.50 inch port area 13.28 inches of port area per foot
-
Hey errrrrbody. I am very close to locally purchasing a ZX350.4 for my first mids & highs amp for a great price in my city up here in Canada. the reason the deal is good is because the amp is supposedly not working properly. What the seller has said in his ad, and as well as through text messages is that it "Works great but won't turn off. The technician said the FAT must have been fried (whatever that means) other than that it still works." and.. "it turns on the moment you hook it up to the battery but it won't shut off even with the car turned off. It was bought brand new but I just shorted it when I installed it." Has anyone ever dealt with a problem like this? Is it repairable? I personal had my bass amp repaired at some circuit board repair company in town so that may be an option for me as well. Please advise!!!
-
I'm replacing the power and ground in my car to 0 awg and plan on doing the big three upgrade too. I'm on the fence on choosing which brand to buy though. EXO from YouTube talks Audio Technix so I checked there site and I am guessing 20 feet will be enough to run from the battery to the back seat and maybe the big three too. But I can get 20 feet of 0 awg power wire from Audio Technix for $70 but I also did some looking around and found Cadence 0 gauge on AudioSavings which is $50 for 25 feet. I just wanna buy the right stuff. Help.
-
I am currently running two JL 12W3's and am looking to upgrade to a single, better sub. I'm having a hard time deciding between the two in the title. Please help. I listen to a lot of metal and rap. So i need quality and great response time for double bass and whopping bass for 808's and rap. -
i need help deleting vehicles from my garage as i no longer have them. have been trying to figure out how and i just cant figure it out. can anyone help? please? -
I have a DC audio M3 8" Dual ohm sub 600 watts RMS 1200 max and I do believe i burnt the coil. Im running a Hifonics Brutus 1400 1 channel mono block class D. It's wired correctly and ran fine for the few months, left for a job out of town for 5 weeks my truck sat parked. Now the sub smells burnt. If you'd like a picture of how the amp is tuned i would gladly email it to you.
-
okay i just bought the dd1 a few days ago and i had couple quick questions. When tunning the amp should i use cd test track or downloaded versions on phone via bluetooth. honestly i dont listen to cds im either pluged into aux usb or bluetooth does that mean i should tune my amps while playing the track on my phone using aux usb or bluetooth or does it not matter its all them same??? reason i ask is because aux usb and bluetooth are considerably louder than cd i have pioneer 4800 bhs
-
I have recently gotten a sundown audio zv4 15" d2. I'm looking for an amp that will power it along with a secondary battery and then the best way to build a box to go into a Toyota Corolla trunk Whether it's sub port back, sub back port back etc What are some great amp brands that will rms 2000-3500 watts and sustain play It can be bang for buck or bigger price range Also would a aero port be better or regular port space wise and effiecency wise Thank you very much
-
A friend wants me to recone his Sundown 10" sub but we can't figure out what model/version it is so we can order the correct recone kit. I've sent 2 emails to Sundown and also a email to directronix for help but so far no response. I don't want to guess and end up with the wrong recone and have to send it back. I've included some pics before the sub was stripped down. Really hope someone can help.
-
Hi all I have just bought two 12 Alpine type r 12d2s 1000 RMS each. I am looking to put them in ported enclosure but need help on what size to use. I'm looking for deep loud and low bass with the best frequency respose possible. I am able to fit a 4 cubic foot box in my trunk after port displacement and sub displacement. Also if I tune to say 32hz will I get enough bass upwards of 45hz or will it start to roll of/ Also what size port should I use I was thinking 3 inch wide 12 high does port size affect frequency response such as making the response shorter or longer. Hope some one can be of assistance -
Is There Still A Show Going On This Weekend Even Though Its Going To Rain Because I Dont Want To Drive 5 Hours For Nothing Its My Very First 1 Im Really Looking Foward To It
-
Ok so i wanna install my car audio in my garage as garageaudio i have speakers,subs,amp,capacitor,headunit. What else do i need? Links would be helpful...
-
I've got a 2000 Nissan Pathfinder and right now I'm on my second system, running a Power Acoustik LT1440/2 bridged for a Kicker L7 in a Kicker custom box that they discontinued with the metal grill on it all on stock electrical with a new head unit, 2011 Pioneer DEH-6350SD. The box is pretty big, but im looking to upgrade and found Audio Queue. i live in an area where the only car audio store i know of reps Z-Stat and thats really about it. I tend to stay away from most of their other products and only have a pair Z-Stat woofers in my front doors because i blew my bose up there before i knew much about car audio. Found what ive got now online. Wondering if i were to buy two AQ SDC2.5 12's and throw them in a generic ported box with an MB Quart ONX 1.1500D, if it would be worth the change, or if i would even notice the difference. Should i find a custom box? ported or bandpass? -
Hi I'm planning on building my own box for a ROCKFORD FOSGATE T2. I was wondering if someone could help me with a diagram with the dimensions, because I'm not sure how to incorporate a port into the box and where to put it for the best sound. I wanted it ported and it has to be small enough to fit in a sedans trunk. Any help would be much appreciated. Thanks
